Mitsubishi Electric MELSEC iQ-F Series - Chapter 4 Iq-F Setting; Setting Parameters; Setting the Fixed Cycle

4 IQ-F SETTING
4.1 Setting Parameters
27
4
4 IQ-F SETTING
4.1 Setting Parameters
For the fixed cycle interrupt and high-speed counter, set parameters with GX Works3.
Setting the fixed cycle
Set the interrupt program of the 1 ms cycle internal timer.
1. Select [Add New Data] from "Navigation" window  [Program]  [Fixed Scan] and create the fixed scan program.
The fixed scan program is registered in interrupt pointer I31.