Mitsubishi Electric MELSEC iQ-F Series - Design and Safety Precautions; Design Precautions - Warning

2
1 OVERVIEW
1.1 Function Block (FB) List
1 OVERVIEW
1.1 Function Block (FB) List
The following shows the list of FBs for using the cam output control function.
1.2 Device Name
1.3 Procedure Overview
*1 For details, refer toPage 27 IQ-F SETTING.
*2 For details, refer toPage 29 WIRING.
*3 For details, refer toPage 31 CREATING PROGRAMS.
Item Description
M+CamCtr_CamOutput_F Turns on or off the cam output according to the input angle (count value).
M+CamCtr_CamOutputTable_F Sets the angle for ON/OFF control of the cam output.
M+CamCtr_AngleAdvFunc_F Sets the automatic angle advance.
Device name Description
iQ-F FX5 series programmable controller Use the FX5U CPU or FX5UC CPU module.
iQ-F Setting
*1
Parameter setting
• Fixed cycle setting
• Interrupt setting
Wiring procedure
• Wiring example
Program setting
• Library registration procedure
• FB arrangement
• Program application examples
Wiring
*2
Creating the program
*3