Mitsubishi Electric Melservo HF-KN Series - Mounting Direction

2. INSTALLATION
2 - 2
2.1 Mounting direction
(1) Standard servo motor
The following table indicates the mounting direction of the standard servo motor.
Servo motor series Mounting direction
HF-KN
HF-SN
May be installed in any
direction.
For mounting in the horizontal direction, it is recommended to set the connector section downward.
When installing the servo motor vertically or obliquely, provide a connection and trap for the cable.
Cable trap
(2) Servo motor with an electromagnetic brake
The servo motor with an electromagnetic brake can also be installed in the same orientation as the
standard servo motor. When the servo motor with an electromagnetic brake is installed with the shaft
end at top, the brake plate may generate sliding sound but it is not a fault.