APPENDIX
App. - 4
App. 5 Selection example of servo motor power cable
POINT
Selection condition of wire size is as follows.
Wire length: 30 m or less
Some cables do not fit into the option or the recommended cable clamp. Select
a cable clamp according to the cable diameter.
Selection example when using the 600 V grade EP rubber insulated chloroprene sheath cab-tire cable
(2PNCT) for servo motor power (U, V, and W) is indicated below.
Servo motor Wire size [mm
2
]
HF-SN52 1.25
HF-SN102 1.25
HF-SN152 2
HF-SN202 2
HF-SN302 3.5
To Next Page
Loading...
