Mitsubishi Electric Melservo HF-KN Series - Wiring Connectors (Connector Configurations D;E;F;G)

3. CONNECTORS USED FOR SERVO MOTOR WIRING
3 - 3
3.3 Wiring connectors (connector configurations D/E/F/G)
Angle plug
(one-touch connection type)
Straight plug
(one-touch connection type)
Plug (DDK)
Connector
configuration
Feature
Type Plug Socket contact Contact shape
Cable OD
[mm]
(reference)
Servo motor
encoder
connector
(Note)
CMV1-#22ASC-S1-100
Soldering type
Applicable wire size: AWG 20 or less
CMV1-#22ASC-C1-100
Crimping type
Applicable wire size: AWG 24 to 20
The crimping tool (357J-53162T) is
required.
CMV1-SP10S-M1
(one-touch connection
type)
CMV1-#22ASC-C2-100
Crimping type
Applicable wire size: AWG 28 to 24
The crimping tool (357J-53163T) is
required.
5.5 to 7.5
CMV1-#22ASC-S1-100
Soldering type
Applicable wire size: AWG 20 or less
CMV1-#22ASC-C1-100
Crimping type
Applicable wire size: AWG 24 to 20
The crimping tool (357J-53162T) is
required.
Straight
CMV1-SP10S-M2
(one-touch connection
type)
CMV1-#22ASC-C2-100
Crimping type
Applicable wire size: AWG 28 to 24
The crimping tool (357J-53163T) is
required.
7.0 to 9.0
CMV1-#22ASC-S1-100
Soldering type
Applicable wire size: AWG 20 or less
CMV1-#22ASC-C1-100
Crimping type
Applicable wire size: AWG 24 to 20
The crimping tool (357J-53162T) is
required.
CMV1-AP10S-M1
(one-touch connection
type)
CMV1-#22ASC-C2-100
Crimping type
Applicable wire size: AWG 28 to 24
The crimping tool (357J-53163T) is
required.
5.5 to 7.5
CMV1-#22ASC-S1-100
Soldering type
Applicable wire size: AWG 20 or less
CMV1-#22ASC-C1-100
Crimping type
Applicable wire size: AWG 24 to 20
The crimping tool (357J-53162T) is
required.
D
(for encoder)
IP67
Angle
CMV1-AP10S-M2
(one-touch connection
type)
CMV1-#22ASC-C2-100
Crimping type
Applicable wire size: AWG 28 to 24
The crimping tool (357J-53163T) is
required.
7.0 to 9.0
CM10-R10P
Note. The connector to be mated.