Mitsubishi Electric Melservo HF-KN Series - Page 25

3. CONNECTORS USED FOR SERVO MOTOR WIRING
3 - 4
Plug Cable clamp Cable Plug Cable clamp Cable
Plug (DDK) Cable clamp (DDK)
Connector
configuration
Feature
Type Model
Cable OD
[mm] (reference)
Model
Servo motor power
supply connector
(Note 2)
8.5 to 11 CE3057-10A-2-D
Straight
CE05-6A18-10SD-D-BSS
Applicable wire size: AWG 14 to 12
10.5 to 14.1 CE3057-10A-1-D
8.5 to 11 CE3057-10A-2-D
IP67
EN compliant
Angle
CE05-8A18-10SD-D-BAS
Applicable wire size: AWG 14 to 12
10.5 to 14.1 CE3057-10A-1-D
Straight
D/MS3106B18-10S
Applicable wire size: AWG 14 to 12
E
(for power
supply)
(Note 1)
General
environment
Angle
D/MS3108B18-10S
Applicable wire size: AWG 14 to 12
14.3 or less
(bushing ID)
D/MS3057-10A
MS3102A18-10P
Note 1. Not comply with EN.
2. The connector to be mated.