Mitsubishi Electric Melservo HF-KN Series - Page 26

3. CONNECTORS USED FOR SERVO MOTOR WIRING
3 - 5
Angle plug
(one-touch connection type)
Straight plug
(one-touch connection type)
Plug (DDK)
Connector
configuration
Feature
Type Plug Socket contact Contact shape
Cable OD
[mm]
(reference)
Servo motor
electromagnetic
brake
connector
(Note)
CMV1-#22BSC-S2-100
Soldering type
Applicable wire size: AWG 16 or less
CMV1-SP2S-S
(one-touch connection
type)
CMV1-#22BSC-C3-100
Crimping type
Applicable wire size: AWG 20 to 16
The crimping tool (357J-53164T) is
required.
4.0 to 6.0
CMV1-#22BSC-S2-100
Soldering type
Applicable wire size: AWG 16 or less
CMV1-SP2S-M1
(one-touch connection
type)
CMV1-#22BSC-C3-100
Crimping type
Applicable wire size: AWG 20 to 16
The crimping tool (357J-53164T) is
required.
5.5 to 7.5
CMV1-#22BSC-S2-100
Soldering type
Applicable wire size: AWG 16 or less
CMV1-SP2S-M2
(one-touch connection
type)
CMV1-#22BSC-C3-100
Crimping type
Applicable wire size: AWG 20 to 16
The crimping tool (357J-53164T) is
required.
7.0 to 9.0
CMV1-#22BSC-S2-100
Soldering type
Applicable wire size: AWG 16 or less
Straight
CMV1-SP2S-L
(one-touch connection
type)
CMV1-#22BSC-C3-100
Crimping type
Applicable wire size: AWG 20 to 16
The crimping tool (357J-53164T) is
required.
9.0 to 11.6
CMV1-#22BSC-S2-100
Soldering type
Applicable wire size: AWG 16 or less
CMV1-AP2S-S
(one-touch connection
type)
CMV1-#22BSC-C3-100
Crimping type
Applicable wire size: AWG 20 to 16
The crimping tool (357J-53164T) is
required.
4.0 to 6.0
CMV1-#22BSC-S2-100
Soldering type
Applicable wire size: AWG 16 or less
CMV1-AP2S-M1
(one-touch connection
type)
CMV1-#22BSC-C3-100
Crimping type
Applicable wire size: AWG 20 to 16
The crimping tool (357J-53164T) is
required.
5.5 to 7.5
CMV1-#22BSC-S2-100
Soldering type
Applicable wire size: AWG 16 or less
CMV1-AP2S-M2
(one-touch connection
type)
CMV1-#22BSC-C3-100
Crimping type
Applicable wire size: AWG 20 to 16
The crimping tool (357J-53164T) is
required.
7.0 to 9.0
CMV1-#22BSC-S2-100
Soldering type
Applicable wire size: AWG 16 or less
F
(for
electromag
netic
brake)
IP67
Angle
CMV1-AP2S-L
(one-touch connection
type)
CMV1-#22BSC-C3-100
Crimping type
Applicable wire size: AWG 20 to 16
The crimping tool (357J-53164T) is
required.
9.0 to 11.6
CM10-R2P
Note. The connector to be mated.