Mitsubishi Electric Melservo HF-KN Series - Page 27

3. CONNECTORS USED FOR SERVO MOTOR WIRING
3 - 6
Plug Cable clamp Cable Plug Cable clamp Cable
Plug (DDK) Cable clamp (DDK)
Connector
configuration
Feature
Type Model
Cable OD
[mm] (reference)
Model
Servo motor power
supply connector
(Note 2)
9.5 to 13 CE3057-12A-2-D
Straight
CE05-6A22-22SD-D-BSS
Applicable wire size: AWG 10 to 8
12.5 to 16 CE3057-12A-1-D
9.5 to 13 CE3057-12A-2-D
IP67
EN compliant
Angle
CE05-8A22-22SD-D-BAS
Applicable wire size: AWG 10 to 8
12.5 to 16 CE3057-12A-1-D
Straight
D/MS3106B22-22S
Applicable wire size: AWG 10 to 8
G
(for power
supply)
(Note 1)
General
environment
Angle
D/MS3108B22-22S
Applicable wire size: AWG 10 to 8
15.9 or less
(bushing ID)
D/MS3057-12A
MS3102A22-22P
Note 1. Not comply with EN.
2. The connector to be mated.