To Next PageTo Next PageHow to troubleshoot a board error on Mitsubishi Electric Servo Drives?
If your Mitsubishi Electric Servo Drives are showing a board error, it indicates a fault with one of the boards. Replace the faulty board.
What to do if Mitsubishi Electric MR-J4-350B(-RJ) Servo Drives report a control process error?
If your Mitsubishi Electric Servo Drives have a control process error, investigate control process configuration.
General| Series | MR-J4 |
|---|---|
| Model | MR-J4-350B(-RJ) |
| Type | AC Servo Drive |
| Rated Output | 3.5 kW |
| Feedback | Incremental encoder, Absolute encoder |
| Protection | IP20 |
| Ambient Temperature | 0 °C to 55 °C |
| Storage Temperature | -20 °C to 65 °C |
| Communication | SSCNET III/H |
| Humidity | 90% RH or less (non-condensing) |
| Vibration | 5.9 m/s² |
| Voltage | 3-phase 200-230VAC |
| Control Method | Sinusoidal PWM control, current control |
