To Next PageTo Next PageWhy does my Mitsubishi Electric Mr. SLIM PKA-M35LAL2 Air Conditioner make a cracking or creaking sound?
These sounds can be heard when parts rub against each due to expansion and contraction from temperature changes in your Mitsubishi Electric Air Conditioner.
What does it mean when an error code appears on my Mitsubishi Electric Mr. SLIM PKA-M35LAL2 Air Conditioner remote controller display?
An error code on your Mitsubishi Electric Air Conditioner remote indicates that the protection devices have been activated. Turn off the power switch immediately and consult your dealer. Provide the dealer with the model name and the error code displayed.
Why does my Mitsubishi Electric Mr. SLIM PKA-M35LAL2 Air Conditioner have an unpleasant odor?
Your Mitsubishi Electric Air Conditioner might be emitting an unpleasant odor because the indoor unit draws in air containing gases from walls, carpeting, and furniture, as well as odors trapped in clothing, and then recirculates this air into the room.
How to fix remote controller if nothing appears in the display of my Mitsubishi Electric Mr. SLIM PKA-M35LAL2?
If your Mitsubishi Electric Air Conditioner remote controller display is blank or faint, replace the batteries and press the Reset button. If nothing appears even after the batteries are replaced, make sure that the batteries are installed in the correct directions (+, –).
Why does warm air not blow from the indoor unit soon after starting heating operation on my Mitsubishi Electric Air Conditioner?
Warm air does not blow from your Mitsubishi Electric Air Conditioner until the indoor unit has sufficiently warmed up.
Why does my Mitsubishi Electric Air Conditioner stop before reaching the set temperature in heating mode?
When the outdoor temperature is low and the humidity is high, frost may form on the outdoor unit of your Mitsubishi Electric Air Conditioner. Normal operation should begin after approximately 10 minutes.
What does “Please Wait” mean on my Mitsubishi Electric Mr. SLIM PKA-M35LAL2 remote controller display?
The initial settings are being performed. Wait approximately 3 minutes for your Mitsubishi Electric Air Conditioner.
Why do the vanes move past the set position when changing the airflow direction on my Mitsubishi Electric Mr. SLIM PKA-M35LAL2 Air Conditioner?
When the airflow direction is changed, the vanes move to the set position after detecting the base position in your Mitsubishi Electric Air Conditioner.
Why does my Mitsubishi Electric Mr. SLIM PKA-M35LAL2 make a flowing water or hissing sound?
These sounds can be heard when refrigerant is flowing in your Mitsubishi Electric Air Conditioner or when the refrigerant flow is changing.
Why does my Mitsubishi Electric Mr. SLIM PKA-M35LAL2 emit a white mist or vapor from the indoor unit?
A white mist or vapor may appear from your Mitsubishi Electric Air Conditioner's indoor unit if the indoor temperature and humidity are high when operation starts. Also, during defrosting mode, cool airflow may blow down and appear like a mist.
General| Brand | Mitsubishi Electric |
|---|---|
| Model | Mr. SLIM PKA-M35LAL2 |
| Category | Air Conditioner |
| Language | English |
Details the wired remote controller's interface and functions.
Describes the remote controller display, buttons, and their functions.
Instructions for powering the air conditioner on and off.
Guides on selecting operation modes like Cool, Dry, Auto, Heat.
How to set the desired temperature for different modes.
Instructions for adjusting the fan speed.
How to control the direction of airflow using vanes and louvers.
