To Next PageTo Next PageWhy does my Mitsubishi Electric Air Conditioner make a cracking or creaking sound?
These sounds can be heard when parts rub against each due to expansion and contraction from temperature changes in your Mitsubishi Electric Air Conditioner.
What does it mean when an error code appears on my Mitsubishi Electric Mr. SLIM PKA-M35LA2 Air Conditioner remote controller display?
An error code on your Mitsubishi Electric Air Conditioner remote indicates that the protection devices have been activated. Turn off the power switch immediately and consult your dealer. Provide the dealer with the model name and the error code displayed.
Why does my Mitsubishi Electric Mr. SLIM PKA-M35LA2 have an unpleasant odor?
Your Mitsubishi Electric Air Conditioner might be emitting an unpleasant odor because the indoor unit draws in air containing gases from walls, carpeting, and furniture, as well as odors trapped in clothing, and then recirculates this air into the room.
How to fix remote controller if nothing appears in the display of my Mitsubishi Electric Air Conditioner?
If your Mitsubishi Electric Air Conditioner remote controller display is blank or faint, replace the batteries and press the Reset button. If nothing appears even after the batteries are replaced, make sure that the batteries are installed in the correct directions (+, –).
Why does warm air not blow from the indoor unit soon after starting heating operation on my Mitsubishi Electric Mr. SLIM PKA-M35LA2?
Warm air does not blow from your Mitsubishi Electric Air Conditioner until the indoor unit has sufficiently warmed up.
Why does my Mitsubishi Electric Mr. SLIM PKA-M35LA2 Air Conditioner stop before reaching the set temperature in heating mode?
When the outdoor temperature is low and the humidity is high, frost may form on the outdoor unit of your Mitsubishi Electric Air Conditioner. Normal operation should begin after approximately 10 minutes.
What does “Please Wait” mean on my Mitsubishi Electric Air Conditioner remote controller display?
The initial settings are being performed. Wait approximately 3 minutes for your Mitsubishi Electric Air Conditioner.
Why do the vanes move past the set position when changing the airflow direction on my Mitsubishi Electric Air Conditioner?
When the airflow direction is changed, the vanes move to the set position after detecting the base position in your Mitsubishi Electric Air Conditioner.
Why does my Mitsubishi Electric Mr. SLIM PKA-M35LA2 Air Conditioner make a flowing water or hissing sound?
These sounds can be heard when refrigerant is flowing in your Mitsubishi Electric Air Conditioner or when the refrigerant flow is changing.
Why does my Mitsubishi Electric Mr. SLIM PKA-M35LA2 Air Conditioner emit a white mist or vapor from the indoor unit?
A white mist or vapor may appear from your Mitsubishi Electric Air Conditioner's indoor unit if the indoor temperature and humidity are high when operation starts. Also, during defrosting mode, cool airflow may blow down and appear like a mist.
General| Brand | Mitsubishi Electric |
|---|---|
| Model | Mr. SLIM PKA-M35LA2 |
| Category | Air Conditioner |
| Language | English |
Explains symbols on unit, in text, and illustrations, plus general safety warnings.
Instructions on how to properly dispose of the air conditioner unit.
Identifies key parts of the indoor air conditioning unit.
Details the buttons and display of the wired remote controller.
Explains the 'Full' and 'Basic' display modes and various status icons.
Illustrates and labels the main components of the outdoor unit.
Instructions for switching the air conditioner unit on and off.
Describes how to select operation modes like Cool, Dry, Auto, and Heat.
Guide to setting the desired temperature for different operation modes.
Details how to adjust the fan speed for optimal airflow.
Guide to navigating menus and setting airflow direction.
Information on timer functions for wired remote controllers.
How to operate the unit using emergency buttons when the remote is unavailable.
Guide on cleaning, resetting the filter indicator, and maintenance.
Details on cleaning and replacing the optional air cleaning filter.
Instructions for wiping the exterior and cleaning stains on the unit.
Troubleshooting guide for common problems like no heating/cooling or unusual sounds.
Explanation of remote controller display icons and error code meanings.
Troubleshooting for noise issues and unexpected unit behavior.
Technical specifications including power, dimensions, airflow, and noise levels.
