To Next PageTo Next PageWhat to do if my Mitsubishi Electric MSZ-AP42VGD Air Conditioner fails to connect to the router?
If your Mitsubishi Electric Air Conditioner fails to connect to the Router and is starting up the indoor unit connection, check the DHCP Settings of the Router, or check IP address settings of the Wi-Fi interface.
General| Cooling Capacity | 4.2 kW |
|---|---|
| Heating Capacity | 5.0 kW |
| Power Supply | 220-240V, 50Hz |
| Weight (Indoor Unit) | 9 kg |
| Weight (Outdoor Unit) | 34 kg |
| Refrigerant | R32 |
| Outdoor Unit Weight | 34 kg |
| Indoor Unit Weight | 9 kg |
| Type | Split System |
Explains symbols used in the manual for warnings and instructions.
Defines warning and caution symbols for hazard levels and handling.
Covers safe installation practices, power supply, and grounding requirements.
Details safe usage of the Wi-Fi interface, including handling and environment.
Instructions for programming daily and weekly operating schedules.
Instructions for cleaning the main air filter and its recommended frequency.
Steps for connecting via Access Point Mode to a router.
Instructions for connecting using WPS-Push method.
Solutions for common connection and communication errors.
Lists common indoor unit problems and their solutions.
Addresses issues with the remote controller and unit response.
Lists suitable and unsuitable places for unit installation.
