Do you have a question about the Mitsubishi Electric MXZ-2C20NAHZ3 and is the answer not in the manual?
General safety rules to follow before starting any work.
Specific safety guidelines for handling R410A refrigerant.
Manages compressor heating to prevent issues from refrigerant liquefaction.
Automatically detects and corrects improper wiring or piping.
Adjusts refrigerant evaporating temperature settings for optimal performance.
Important safety and procedural notes before starting troubleshooting.
How to recall and interpret stored failure codes for diagnosis.
A flowchart guiding the troubleshooting process based on unit indicators.
A table correlating LED indications with specific faults and their remedies.
Provides resistance and voltage criteria for checking key components.
Step-by-step diagnostic flowcharts for specific operational issues.
Diagrams showing test points and voltage measurements on control boards.
Instructions for disassembling specific model series, focusing on panel removal.
Instructions for disassembling specific model series, focusing on panel removal.
Instructions for disassembling specific model series, focusing on panel removal.
| Type | Heat Pump |
|---|---|
| Outdoor Unit Model | MXZ-2C20NAHZ3 |
| Cooling Capacity | 20, 000 BTU/h |
| Heating Capacity | 22, 000 BTU/h |
| Energy Efficiency Ratio (EER) | 12.5 |
| Seasonal Energy Efficiency Ratio (SEER) | 20.0 |
| Refrigerant | R410A |
| Sound Level | 49 dB(A) |
| Voltage | 208 / 230 V |
| Phase | Single |
| Maximum Number of Connectable Indoor Units | 2 |
| Indoor Unit Dimensions (HxWxD) | Varies by model |
| Indoor Unit Weight | Varies by model |
| Operating Temperature (Cooling) | 14°F to 115°F |
| Operating Temperature (Heating) | -13°F to 75°F |
| Indoor Unit Compatibility | Compatible with various indoor units |
| Power Supply | Outdoor Unit |












Loading...