To Next PageTo Next PageWhat to do if the Mitsubishi Electric MXZ-8C48NAHZ trouble has reoccurred?
If a problem with your Mitsubishi Electric Air Conditioner keeps happening, determine the cause and take corrective action as described in section “8-3 SELF-DIAGNOSIS ACTION BY FLOWCHART”. Also, troubleshoot to find the cause of the issue, referring to section “8-4. TROUBLESHOOTING BY INFERIOR PHENOMENA”.
What to do if the Mitsubishi Electric MXZ-8C48NAHZ trouble is not reoccurring?
If the trouble with your Mitsubishi Electric Air Conditioner is not reoccurring, consider temporary issues like protection devices activating in the refrigerant circuit (including the compressor), loose wiring, or noise. Re-examine the symptoms, installation environment, refrigerant level, weather conditions when the problem occurred, and wiring. Reset check code logs and restart the unit after finishing service. There may be no abnormality concerning parts such as the electrical component, controller board, remote controller, etc.
What to do if the Mitsubishi Electric Air Conditioner trouble is not logged?
If the trouble with your Mitsubishi Electric Air Conditioner is not logged, re-check the abnormal symptom. If the cause isn't clear, keep using the unit for now. Troubleshoot and find the cause of the issue according to “8-4. TROUBLESHOOTING BY INFERIOR PHENOMENA”. There may be no abnormality concerning parts such as the electrical component, controller board, remote controller, etc.
General| Type | Heat Pump |
|---|---|
| Cooling Capacity (BTU) | 48, 000 |
| Heating Capacity (BTU) | 54, 000 |
| Refrigerant | R410A |
| Voltage | 208/230 V |
| Phase | 1 |
| Maximum Number of Connectable Indoor Units | 8 |
| Heating Operating Range (°F) | -13 - 75 |
| Series | MXZ |
| Compressor Type | Inverter-Driven |
| Cooling Operating Range (°F) | 14 - 115 |
| Outdoor Unit Dimensions | 13 |
| Power Supply | 208/230V, 1Ph, 60Hz |
Specific warnings and precautions for using R410A refrigerant.
Guidelines and specifications for refrigerant piping installation.
Details on the system architecture and unit configurations.
Illustrative examples of combining indoor and outdoor units.
Technical data and performance specs for outdoor units.
Technical data and performance specs for branch boxes.
Guide for determining unit capacity based on load and conditions.
Correction factors for cooling/heating capacity based on temperature.
Graphical representation of capacity ratios for indoor units.
Detailed physical dimensions and installation space for outdoor units.
Electrical schematic for outdoor unit components and connections.
Guidelines for setting up M-NET communication and addresses.
Diagrams illustrating refrigerant flow in cooling and heating modes.
Pre-test run procedures and checks for proper installation.
Flowcharts for diagnosing and resolving system error codes.
Procedures for testing resistance and continuity of parts.
Step-by-step instructions for disassembling the outdoor unit.
Step-by-step instructions for disassembling the branch box.
