Need help?Do you have a question about the Mitsubishi Electric PAC-AH140 and is the answer not in the manual?
General| Brand | Mitsubishi Electric |
|---|---|
| Model | PAC-AH140 |
| Category | Control Unit |
| Language | English |
Precautions before unit installation and electrical work.
Safety measures specific to R410A refrigerant systems.
Checks and considerations before the unit is installed.
Electrical work considerations before moving or reinstalling the unit.
Preparations and cautions before initiating the unit's test run.
Guidance on choosing the correct heat exchanger for the air handling unit.
Details on the specifications of the heat exchanger for various models.
Information on linking indoor units with outdoor units.
Procedures for mounting the controller unit.
Guidelines for performing refrigerant piping work.
Steps for connecting the linear expansion valve piping.
Procedures for setting and connecting thermistors.
Instructions for connecting the power supply.
Wiring for remote controllers, AHU, and transmission cables.
Connecting LEV-kit and thermistor cables to the controller.
Procedures for connecting the distant signal line.
Specifications for external Input/Output connections.
How to set the unit's addresses using rotary switches.
Setting the unit capacity via dip switches.
How to set temperature control parameters using dip switches.
Explains the functions of various dip switches on the control board.
Steps for initial setup and conducting a test run.
To Next Page