Need help?Do you have a question about the Mitsubishi Electric QJ71MB91 and is the answer not in the manual?
General| Number of Ports/Channels | 1 |
|---|---|
| Power Supply | 24 VDC |
| Transmission Speed (TCP) | 10/100 Mbps |
| Station Type | Master/Slave |
| Operating Temperature | 0 to 55 °C |
| Storage Temperature | -25 to 75°C |
| Weight | 0.2 kg |
| Compatibility | MELSEC-Q Series |
| Communication Protocol | Modbus/TCP, Modbus/RTU |
| Number of Connectable Stations | 32 |
| Maximum Number of Connections | 8 |
| Data Bit | 8 bits |
| Stop Bit | 1 or 2 bits (Modbus/RTU) |
| Parity Bit | None, Even, Odd |
| Connection Terminal | RJ45 (TCP/IP), Terminal block (RTU) |
| Isolation Method | Photocoupler isolation |
Guidelines for safe design and implementation of the programmable controller system, including interlocks and prohibited operations.
Step-by-step guide for system setup, including hardware tests and parameter configuration.
Explains wiring precautions for RS-232 and RS-422/485 interfaces, including shields and terminating resistors.
Details parameter types (automatic communication, MODBUS device assignment) and setting methods.
Explains how to use the MBRW instruction for reading/writing MODBUS device data.
Details the MBREQ instruction for slave communication using custom request message formats.
Provides a comprehensive list of symptoms, check points, and corrective actions for module errors.
Explains methods to check module status via LEDs, GX Configurator-MB, and system monitor.
Details diagnostic counters for monitoring communication status in master and slave functions.
Explains error code storage areas, device types, and lists common error codes with their definitions and actions.
To Next Page