Need help?Do you have a question about the Mitsubishi Electric QD75D2 and is the answer not in the manual?
General| Model | QD75D2 |
|---|---|
| Product Type | Positioning Module |
| Category | Control Unit |
| Number of Control Axes | 2 |
| Maximum Output Pulse Frequency | 200 kHz |
| Input Voltage | 24 VDC |
| Number of Inputs | 16 |
| Number of Outputs | 16 |
| Power Supply Voltage | 5 VDC |
| Control Method | Position control |
| Communication Protocol | CC-Link |
| Current Consumption | 0.5 A |
| Mounting | DIN rail |
Precautions for designing the system to ensure safe operation of the programmable controller and prevent mechanical damage.
Precautions for mounting the programmable controller, including environment, installation lever, screws, and power supply.
Lists all parameters, categorized into basic and detailed parameters, with their setting items and buffer memory addresses.
Common precautions for writing data from the CPU module to the QD75 buffer memory, including reading/writing data and speed change restrictions.
Explains the details and usage of OPR control, including Machine OPR and Fast OPR.
Details and usage of major positioning controls, including positioning data and address information.
Explains the details and usage of high-level positioning control, including block start data and condition data.
Explains the QD75 dedicated instructions used to facilitate programming for intelligent function module features.
Provides information on errors and warnings detected by the QD75, including detection details and corrective measures.
To Next Page