Need help?Do you have a question about the Mitsubishi Electric QD75P4N and is the answer not in the manual?
General| Model | QD75P4N |
|---|---|
| Type | Positioning Module |
| Category | Control Unit |
| Manufacturer | Mitsubishi Electric |
| Number of control axes | 4 axes |
| Number of program | 600 programs |
| Positioning data | 600 data/axis |
| Positioning range | -2, 147, 483, 648 to 2, 147, 483, 647 pulses |
| Maximum Output Pulse | 4 Mpps |
| Maximum Output Pulse Frequency | 65535 kpulse/s |
| External I/O | Input: 16 points, Output: 16 points |
| Input Voltage | 24 V DC |
| Power Supply Voltage | 5 V DC (from PLC) |
| Dimensions | 98 mm |
Precautions related to system design, including safety circuits and preventing mechanical damage.
Guidelines for safely mounting the programmable controller in its environment and securing it properly.
Precautions for wiring, including terminal tightening, cable handling, and preventing foreign matter entry.
Precautions for startup and maintenance, including avoiding disassembly and ensuring proper grounding.
Details the installation, wiring, and maintenance procedures for the QD75 product.
Explains errors and warnings detected by the QD75 and their remedies.
To Next Page