Need help?Do you have a question about the Mitsubishi Electric QJ71EIP71 and is the answer not in the manual?
General| Category | Control Unit |
|---|---|
| Communication Protocol | Ethernet/IP |
| Number of Ports/Connectors | 1 |
| Connector Type | RJ45 |
| Interface | Ethernet |
| Transmission Speed | 10/100 Mbps |
| Weight | 0.2 kg |
| Compatibility | Mitsubishi Electric PLCs |
| Type | Ethernet Interface Module |
| Power Supply | 5V DC (from PLC base unit) |
Precautions related to the design and configuration of the system for safe operation.
Precautions for safely mounting and installing the module and related components.
Precautions for safely connecting cables and wiring the module and system.
Precautions for safely starting up, operating, and maintaining the system.
Lists the detailed performance specifications of the EtherNet/IP module.
Explains the tag communication capabilities, including types and parameters.
Outlines procedures and considerations before configuring the EtherNet/IP network.
Lists parameters and their setting methods using Utility Package and GX Works2.
Details how to configure module parameters like IP Address, Tag, and Refresh settings.
Describes communication settings and tag naming conventions for Class1, Class3, and UCMM tags.
Guides through setting parameters for System 1, System 2, and System 3 configurations.
Provides examples of Tag communication programs for various scenarios.
A flowchart to guide users through troubleshooting steps for module issues.
Explains how to interpret LED status to identify causes and corrective actions.
Provides troubleshooting flowcharts for scenarios where Tag communication fails.
Explains how to check and retrieve error codes for module and communication issues.
To Next Page