Need help?Do you have a question about the Mitsubishi Electric Q68AD-G and is the answer not in the manual?
General| Category | Control Unit |
|---|---|
| Number of Channels | 8 |
| Resolution | 16-bit |
| Weight | 0.2 kg |
| Number of Inputs | 8 |
| Number of Outputs | 0 |
| Input Range | Voltage: -10 to +10 V, Current: 0 to 20 mA, 4 to 20 mA |
| Accuracy | Voltage: ±0.1% of full scale Current: ±0.2% of full scale |
| Insulation Method | Photocoupler isolation between I/O and main unit |
| Dimensions | 98x27.4x90 mm |
Precautions related to module design and potential risks.
Details the function for detecting input signal errors and abnormal conditions.
Describes the process and rate alarm warning output functionalities.
Configures extended settings for input signal error detection.
Sets parameters for process and rate alarm warnings.
Configures input signal error detection parameters and limits.
Critical precautions for safe handling and preventing module damage.
Step-by-step procedures for system setup and initial configuration.
Guidelines and important considerations for wiring the module.
Explains how to configure the intelligent function module's internal switches.
Procedures for adjusting offset and gain values for accurate measurement.
Step-by-step guide for performing initial settings of the A/D converter module.
Instructions for configuring automatic refreshing of buffer memory.
Covers monitoring and testing of module parameters and I/O signals.
A general procedure for programming analog-to-digital conversion.
Lists prerequisites and conditions for online module change.
Describes the sequence of operations for an online module change.
Outlines the procedures for online module change based on different scenarios.
Critical precautions to ensure safe and successful online module changes.
A list of error codes and their descriptions and corrective actions.
Troubleshooting common issues and their solutions.
To Next Page