Need help?Do you have a question about the Mitsubishi Electric RD81DL96 and is the answer not in the manual?
General| Model | RD81DL96 |
|---|---|
| Product series | MELSEC iQ-R Series |
| Manufacturer | Mitsubishi Electric |
| Number of external encoder inputs | 4 |
| Input Voltage | 24 V DC |
| Power Consumption | 10 W |
| Operating Temperature | 0 to 55 °C |
| Storage Temperature | -25 to 75 °C |
| Humidity | 5 to 95% RH (non-condensing) |
| Maximum pulse output frequency | 4 MHz |
| Interface | Ethernet |
| Output Voltage | 24 VDC |
| Communication Protocol | Ethernet |
| Shock Resistance | 147 m/s² |
Guidelines for safely designing systems using the programmable controller, covering output circuits and external power.
Details on transmission rates, interface compatibility, sampling capabilities, data types, and output formats.
Step-by-step guide for initial setup, including installation and configuration.
Procedures for inserting, removing, replacing, and managing SD memory cards for the module.
Example procedure for trigger logging, covering data logging settings and graphical display.
Example of continuous logging and report creation using an Xbar-R management chart.
To Next Page