Mitsubishi Electric PAC-IF012B-E User Manual

Interface
(Cased)
PAC-IF011B-E
PAC-IF012B-E
TIL INSTALLATØREN
FÖR INSTALLATÖREN
PARA O INSTALADOR
PER L’INSTALLATORE
PARA EL INSTALADOR
VOOR DE INSTALLATEUR
POUR L’INSTALLATEUR
FÜR INSTALLATEURE
FOR INSTALLER
Emniyetli ve doğru kullanım için, klima cihazını monte etmeden önce bu kılavuzu ve iç ünite montaj kılavuzunu
tamamıyla okuyun.
INSTALLATION MANUAL
For safe and correct use, read this manual and the indoor unit installation manual thoroughly before installing
the air-conditioner unit.
INSTALLATIONSHANDBUCH
Aus Sicherheitsgründen und zur richtigen Verwendung vor der Installation die vorliegende Bedienungsanleitung
und die Installationsanleitung der Innenanlage gründlich durchlesen die Klimaanlage.
MANUEL D’INSTALLATION
Avant d’installer le climatiseur, lire attentivement ce manuel, ainsi que le manuel d’installation de l’appareil
intérieur pour une utilisation sûre et correcte.
INSTALLATIEHANDLEIDING
Lees deze handleiding en de installatiehandleiding van het binnenapparaat zorgvuldig door voordat u met het
installeren van de airconditioner begint.
MANUAL DE INSTALACIÓN
Para un uso correcto y seguro, lea detalladamente este manual y el manual de instalación de la unidad interior
antes de instalar la unidad de aire acondicionado.
MANUALE DI INSTALLAZIONE
Per un uso sicuro e corretto, leggere attentamente il presente manuale ed il manuale d’installazione dell’unità
interna prima di installare il condizionatore d’aria.
MANUAL DE INSTALAÇÃO
Para uma utilização segura e correcta, leia atentamente este manual e o manual de instalação da unidade
interior antes de instalar o aparelho de ar condicionado.
INSTALLATIONSMANUAL
Læs af sikkerhedshensyn denne manual samt manualen til installation af indendørsenheden grundigt, før du
installerer klimaanlægget.
INSTALLATIONSMANUAL
Läs bruksanvisningen och inomhusenhetens installationshandbok noga innan luftkonditioneringen installeras
så att den används på ett säkert och korrekt sätt.
Türkçe (TR)
(RU)
English (GB)
Deutsch (D)
Français (F)
Nederlands (NL)
Español (E)
Italiano (I)
Eλληνικά (GR)
Português (P)
Dansk (DE)
Svenska (SW)

Mitsubishi Electric PAC-IF012B-E Specifications

General

Category	Recording Equipment
Model	PAC-IF012B-E
Manufacturer	Mitsubishi Electric
Communication Protocol	M-NET
Operating Temperature	-10°C to 50°C
Storage Temperature	-20°C to 60°C
Humidity Range	20% to 80% (non-condensing)

Summary

Safety Precautions

Before Installation (Environment)

Precautions for installing the interface unit in suitable environmental conditions and avoiding hazards.

Before Installation or Relocation

Guidelines for safely moving and handling the unit to prevent injury and damage.

Before Electric Work

Essential safety measures and requirements for electrical connections to prevent shock and fire.

Before Starting Test Run

Crucial checks and procedures to ensure safe and correct operation after installation.

Installing the Interface Unit

Check the Parts

Verification of supplied interface unit components against the list before proceeding with installation.

Choosing the Installation Location

Criteria for selecting an optimal and safe installation site for the interface unit.

Installing the Interface Unit

Step-by-step instructions for physically mounting the interface unit.

Electrical Work

Interface Unit Overview and Wiring

Initial steps for electrical work, including cover removal and basic wiring connections for the interface unit.

Interface Unit Power Supplied from Outdoor Unit

Connection patterns for power supply from the outdoor unit to the interface unit.

Separate Interface Unit/Outdoor Unit Power Supplies

Connection patterns for separate power supplies for the interface and outdoor units.

Connecting Thermistor Cable

Procedure for connecting thermistor sensors to the interface controller for temperature monitoring.

Connecting External Input

Instructions for connecting external input signals to the interface controller for demand control.

External Function Setting

How to set functions like operation mode or compressor stop via external signals.

Connecting External Output

Information on connecting external outputs for status signals like operation or error.

Wiring Specification External Output / External Input

Recommended wire types and sizes for external input and output connections.

Switch Setting

How to configure internal switches for operation mode, temperature settings, and thermistor functions.

Before Test Run

Final checks and insulation resistance test before performing the operational test.

Local Application Factors

Heat Exchanger

Requirements for heat exchanger pressure, performance, capacity, and contamination maintenance.

Thermistor Position

Guidance on optimal placement of thermistors for accurate temperature detection.