Mitsubishi Electric DX-TL4509E User Manual (English)

Other manuals for Mitsubishi Electric DX-TL4509E

User Manual38 pages

Installer Manual128 pages

Specification Sheet2 pages

Questions and Answers:

E
Edward RyanAug 15, 2025
Why Mitsubishi Electric DX-TL4509E copy device does not respond?
- M
  Matthew BeardAug 15, 2025
  The copy device may not respond for several reasons. Ensure the recording medium is correctly inserted. Check if the unit is currently loading the recording medium. Verify that the correct playback device is selected. Make sure the recording medium's write-protect is removed. Ensure the peripheral recording device's power supply is ON. Confirm the copy device is registered in the or .
S
Stephen DavisAug 19, 2025
What to do if Mitsubishi Electric DX-TL4509E Recording Equipment does not perform playback?
- T
  Thomas BanksAug 19, 2025
  If the unit doesn't perform playback, check if the LOCK indicator light is on. Verify that the data hasn't been erased. Also, ensure that the correct playback device is selected.
R
robert55Aug 21, 2025
What to do if Mitsubishi Electric DX-TL4509E Recording Equipment unit does not stop recording?
- S
  Scott UnderwoodAug 21, 2025
  If the unit doesn't stop recording, check if the LOCK indicator light is on. During normal, alarm, and emergency recording, press the REC/STOP button for more than 2 seconds. If timer recording is in progress, press the TIMER button for more than 2 seconds to stop it.
C
Charles GibsonAug 25, 2025
How to fix Mitsubishi Electric DX-TL4509E Recording Equipment when button operation is not working?
- M
  Maria AndersonAug 25, 2025
  If the button operation is not working, check if the POWER indicator is flashing. If it is, the unit cannot be operated. Also, check if the LOCK indicator light is on.
P
paula30Aug 27, 2025
How to troubleshoot Mitsubishi Electric Recording Equipment when the unit does not be turned on?
- C
  Christy KingAug 27, 2025
  To troubleshoot why the unit doesn't turn on: * Ensure the power cord is properly plugged in. * Check if the LOCK indicator light is on. * Check if the TIMER indicator light is on. * Verify the MAIN switch on the rear of the unit is not set to “OFF”.
B
Brenda SullivanAug 30, 2025
What to do if Mitsubishi Electric DX-TL4509E Recording Equipment power is on, but the unit does not operate?
- M
  matthewbellAug 30, 2025
  If the power is on but the unit doesn't operate, check if the LOCK indicator light is on and if the POWER indicator is flashing. If the POWER indicator is flashing, the unit cannot be operated. The safety features may be in operation. Reset the unit by pressing the RESET button on the rear panel using a ballpoint pen or similar object, and then turn the power on again.
W
William HillSep 2, 2025
Why Mitsubishi Electric DX-TL4509E Recording Equipment unit does not perform alarm recording?
- V
  Valerie PhillipsSep 3, 2025
  The unit might not perform alarm recording if the recording rate for alarm recording is set to “– – –”. Also, check if the recordable capacity for the alarm recording area is full, or if the unit is in timer recording stand-by mode (TIMER indicator light on). Ensure the peripheral switches, etc., are connected correctly.
A
andrew10Sep 5, 2025
Why Mitsubishi Electric DX-TL4509E unit does not start recording?
- K
  Kimberly GregorySep 5, 2025
  The unit may not start recording if repeat recording is set to "Repeat Off". The recording starts after the time set for recording rate is passed. Check if the unit was stopped during that time.
L
Lance JohnsonSep 8, 2025
Why Mitsubishi Electric DX-TL4509E unit does not perform the motion detection function?
- Z
  zjensenSep 8, 2025
  The unit may not perform the motion detection function if the trigger for alarm recording of the camera number for which the motion detection function to be executed is set to “External”. Also, check if the alarm recording rate of the camera number for which the motion detection function is executed is set to “– – –”. Ensure the value set in “Motion Threshold” of the menu is larger than that of “Motion Mask Settings”, and that the detection area is set correctly.
T
Tiffany RileySep 12, 2025
Why Mitsubishi Electric Recording Equipment unit does not repeat the recording?
- D
  Dawn WhitakerSep 12, 2025
  The unit will not repeat recording if repeat recording is not set to "Repeat On".

Mitsubishi Electric DX-TL4509E Specifications

General

Model	DX-TL4509E
Type	Digital Video Recorder
Number of Channels	9
Video Compression	H.264
Network Connectivity	Ethernet
Video Output	HDMI, VGA
Audio Input	RCA
Audio Output	1 x RCA
Power Supply	AC 100-240V, 50/60Hz
Recording Resolution	1080p
Inputs	9 x BNC (Video)
Operating Temperature	0°C to 40°C