Mitsubishi Electric PAC-IF031B-E - Ftc2(Pac-If031 B-E

Flow temp. controller
C-6
System (FTC2)
Flow temp. controller
2
C-6
First step (Electrical work)
Power supplies (Outdoor only)
Remote controller or external input
Mode select
Temp. setting
System diagram
Remote controller
only
Outdoor unit onlyRemote controllerRemote controller
(PAR-W21MAA) (PAR-W21MAA)
3.1
3.1.1
3.2
Remote controller
and external input
Outdoor unit onlyRemote controllerLocal controller
(External input) (PAR-W21MAA)
3.1
3.1.1
3.2
3.3
3.3.1
External input and
analog input
Outdoor unit onlyAnalog inputLocal controller
(External input)
3.1
3.1.1
3.3
3.3.1
3.3.2
Power supplies
Operation mode
input
Outdoor unit
FTC2
Remote controller
(PAR-W21MAA)
Outdoor unit
FTC2
Remote controller
(PAR-W21MAA)
Local controller
(ON/OFF,MODE)
Local controller
(ON/OFF,MODE,Temp.)
Outdoor unit
FTC2
FTC2
The FTC2 is designed for use with a number of heat pump systems. Please refer to the following table to fi nd the relevant installation information
for your system.