TECHNICIAN MANUAL
FOR INSTALLER
2.10
®
ATTENTION
● The Wireless Interface 1 and 2
must
connect to a 2.4 GHz Wi-Fi
®
network.
● The Wireless Interface 1 and 2 will
not
work on a 5 GHz Wi-Fi network.
○ The Wireless Interface 1 and 2 can only connect to Wi-Fi channels 1-11.
● For the best performance connect the Wireless Interface 1 and 2 to a 2.4 GHz only SSID, but there
are some multi-band Wi-Fi networks that can correctly manage a 2.4 GHz only device.
○ Please verify if your multi-band Wi-Fi router can manage 2.4 GHz only devices.
Note: The set up of the Wireless Interface to the kumo cloud app requires a Wi-Fi network with a live internet
connection.
NOTE
● This manual reects the installation of the Wi-Fi Interface (PAC-WHS01WF-E), Wireless Interface 1
(PAC-USWHS002-WF-1), and Wireless Interface 2 (PAC-USWHS002-WF-2) for the 2.12 and 2.14
kumo cloud app release updates.
● This manual has not been updated yet to show the additions of the 2.12 and 2.14 updates, but the
manual will be updated in the near future.
Note: The changes in 2.12 and 2.14 were minor and did not change the overall way the equipment is installed.
To Next Page
Need help?
General
