Mitsubishi Electric PAR-21MAAT-E User Manual

16
4.2 Function Setting
4.2.1 Operaton Lock (Operation Function Limit Setting)
The following settings can be made.
1 no1 : All buttons except for the [ON/OFF] button are locked.
2 no2 : All buttons are locked.
3 OFF (default): No buttons are locked.
* To activate this operation lock function on the normal screen, hold down the
ON/OFF
button for two seconds while holding
down the
FILTER
( ) button.
How to Lock the Buttons
A
D
(1)(5)
(2)
(3)
(4)
(6)(7)
■ Display example
(1) While pressing the
MODE
button, press the
ON/OFF
button for two seconds to activate the remote controller’s function
selection mode.
(2) Press the
MODE
button to select
FUNCTION
SELECTION
on the screen (at A).
[Display A]
(3) Press the
MENU
button until “LOCKING FUNCTION” appears on the screen (at A).
[Display A]
(4) Press the
ON/OFF
button until the desired lock mode appears on the screen (at D).
[Display D]
(5) While pressing the
MODE
button, press the
ON/OFF
button for two seconds to return to normal mode. Setting is now
complete.
Completing steps (1) to (5) allows use of the operation lock function.
To enable the lock function, carry out the following steps.
CHANGE
LANGUAGE
FUNCTION
SELECTION
MODE
SELECTION
DISP MODE
SETTING
LOCKING
FUNCTION
SELECT
AUTO MODE
LIMIT TEMP
FUNCTION
*
* Displays the mode that is set in “Temperature Range Limit Setting”.
Lock All Except
ON/OFF
No limitation Lock All Buttons

Mitsubishi Electric PAR-21MAAT-E Specifications

General

Brand	Mitsubishi Electric
Model	PAR-21MAAT-E
Category	Remote Control
Language	English