Mitsubishi Electric PCA-A24KA7 User Manual (English)

Other manuals for Mitsubishi Electric PCA-A24KA7

Questions and Answers:

J
Jeremy WardSep 6, 2025
What to do if my Mitsubishi Electric Heat Pump stops without pressing the ON/OFF button?
- R
  Roger AyalaSep 6, 2025
  Check if the off timer is set. If so, press the ON/OFF button to restart operation. If the timer isn't the issue, determine whether the air conditioner is connected to a central wired remote controller and consult the concerned people who control the air conditioner. Also, check if “ ” appears in the wired remote controller display and consult the concerned people who control the air conditioner.
B
Brittany PetersonSep 7, 2025
Why does the vane move past the set position on my Mitsubishi Electric Heat Pump?
- K
  kgarciaSep 7, 2025
  When the airflow up/down direction is changed on your Mitsubishi Electric Heat Pump, the vanes move to the set position after detecting the base position.
C
Colin GibbsSep 9, 2025
What does it mean when “ ” appears on my Mitsubishi Electric Heat Pump wired remote controller display?
- R
  Robert HarrisonSep 9, 2025
  During central control, “ ” appears in the wired remote controller display and air conditioner operation cannot be started or stopped using the wired remote controller.
D
Daniel JonesSep 12, 2025
Why does the set temperature change when dry mode starts on my Mitsubishi Electric Heat Pump?
- M
  Michael JonesSep 12, 2025
  When Dry mode starts on your Mitsubishi Electric Heat Pump, the set temperature automatically changes to the optimum initial set temperature.
A
Aaron WhitneySep 12, 2025
Why is my Mitsubishi Electric Heat Pump noise louder than specified?
- J
  James RuizSep 12, 2025
  The indoor operation sound level is affected by the acoustics of the particular room and will be higher than the noise specification, which was measured in an echo-free room.

Mitsubishi Electric PCA-A24KA7 Specifications

General

Cooling Capacity	2.5 kW
Heating Capacity	3.2 kW
Power Supply	220-240 V, 50 Hz
Refrigerant	R410A
Weight (Indoor Unit)	9 kg
Type	Split System
Noise Level (Outdoor Unit)	50 dB(A)