To Next PageTo Next Page
Need help?Do you have a question about the Mitsubishi Electric PE-4EJSA and is the answer not in the manual?
General| Cooling Capacity (kW) | 3.5 |
|---|---|
| Refrigerant | R410A |
| Cooling Capacity (BTU) | 12000 |
| Power Supply | 220-240V, 50Hz |
| Indoor Unit Weight | 9 kg |
| Noise Level (Outdoor) | 50 dB |
| Outdoor Unit Dimensions (WxHxD) | 780x540x269 mm |
Details components of the indoor unit.
Explains the remote controller's functions and buttons.
Technical data and ratings for indoor and outdoor units.
Cooling capacity tables based on various temperature conditions.
Provides dimensional drawings and part numbers for indoor units.
Illustrates refrigerant flow for specific indoor/outdoor unit combinations.
Outlines the primary operational sequence of the air conditioner.
Details the operational logic and controls for COOL mode.
Explains the operational logic and controls for DRY mode.
Describes the operation and fan speed control in FAN mode.
Overview of the system's control architecture and components.
How to activate and interpret the unit's self-diagnostic modes.
Common issues and their potential causes and solutions.
Procedures for testing key components like thermistors and fan motors.
Step-by-step guide to remove the drain pan from the indoor unit.
Instructions for accessing and removing electrical components.
Steps to safely remove thermistors and fan assemblies.
Lists major structural components and their part numbers for PE-3 Series.
Lists major structural components and their part numbers for PE-4 Series.
Lists major structural components and their part numbers for PE-5/6 Series.
Lists electrical components and their part numbers across various models.
Details optional refrigerant pipe kits and their specifications.
Information on the extension cable for remote controllers.
Information on program timers and their functions.
