Do you have a question about the Mitsubishi Electric PEAD-P2.5EA and is the answer not in the manual?
Model | PEAD-P2.5EA |
---|---|
Category | Air Conditioner |
Cooling Capacity | 2.5 kW |
Heating Capacity | 3.2 kW |
Power Supply | 220-240 V, 50 Hz |
Indoor Unit Dimensions (W x H x D) | 700 x 250 x 620 mm |
Indoor Unit Weight | 21 kg |
Outdoor Unit Dimensions (W x H x D) | 840 x 880 x 330 mm |
Outdoor Unit Weight | 54 kg |
Lists tools required for R407C refrigerant service.
Guidelines for refrigerant recovery and recharging.
Details the process of recharging refrigerant.
Details the function of each button on the remote controller.
Explains the various indicators on the remote controller display.
Defines the standard conditions for performance ratings.
Specifies performance ratings for cooling-only models.
Provides standard operating data for heat pump models.
Provides standard operating data for cooling-only models.
Fan performance curves and airflow correction factors.
Fan performance curves and airflow correction factors.
Fan performance curves and airflow correction factors.
Fan performance curves and airflow correction factors.
Fan performance curves and airflow correction factors.
Fan performance curves and airflow correction factors.
Fan performance curves and airflow correction factors.
Dimensions and installation details for indoor units.
Physical dimensions of the remote controller.
Step-by-step guide to remove the fan motor.
Step-by-step guide to remove the booster heater.
Lists external components for various models.
Lists parts related to the blower assembly.
Lists components for the control box assembly.
Lists remote controller and its connecting cable.
Optional refrigerant pipe kits for different lengths.
Information on the centralized remote controller.
Adapter for program timer functionality.
Adapter for system control and external contacts.
Adapter for remote indication and check.
Program timer unit for control.
Optional motors for increased external static pressure.
Mechanism for versatile drain piping layouts.