To Next PageTo Next Page
Need help?Do you have a question about the Mitsubishi Electric PEHD-P1.6EAH and is the answer not in the manual?
General| Series | PEHD |
|---|---|
| Cooling Capacity (kW) | 1.6 |
| Heating Capacity (kW) | 1.8 |
| Power Source | 220-240 V, 50 Hz |
| Noise Level (Outdoor Unit) | 45 dB |
Identifies and illustrates parts of the indoor unit.
Details the buttons and functions of the remote controller.
Explains the indicators and symbols on the remote controller display.
Provides detailed performance data for heat pump models under ISO T1 conditions.
Details performance data for cooling-only models under ISO T1 conditions.
Lists factors to adjust cooling capacity based on refrigerant pipe length.
Presents heating capacity data and correction factors.
Illustrates fan performance curves for various models and static pressures.
Shows correction factors for air flow in cooling and heating modes.
Provides electrical specifications for heat pump models.
Details electrical specifications for cooling-only models.
Presents dimensional drawings and specifications for indoor units.
Shows the physical dimensions of the remote controller.
Step-by-step guide for removing the fan motor assembly.
Procedure for safely removing the booster heater unit.
Lists external parts for indoor units with part numbers and quantities.
Details parts related to the blower assembly, including motors and fans.
Lists components found within the control box, such as relays and thermistors.
Describes optional refrigerant piping kits and their specifications.
Lists adapters for centralized control, timers, and remote operation.
Details optional motors for extended duct use and drain lift-up mechanisms.
