Mitsubishi Electric PKA-RP50HAL User Manual (English)

Other manuals for Mitsubishi Electric PKA-RP50HAL

Questions and Answers:

S
stevenscynthiaAug 21, 2025
How to fix Mitsubishi Electric Air Conditioner that does not heat or cool well?
- H
  Holly GordonAug 21, 2025
  If your Mitsubishi Electric Air Conditioner isn't heating or cooling effectively, there are several potential causes and solutions: * A dirty or clogged filter can reduce airflow. Clean the filter to resolve this. * Check the temperature adjustment and adjust the set temperature. * Ensure there is plenty of space around the outdoor unit. * Check if the indoor unit air intake or outlet is blocked. * Make sure that a door or window has not been left open.
S
Sandra RamirezAug 23, 2025
What to do if the Mitsubishi Electric PKA-RP50HAL trouble is reoccurring?
- T
  torresrichardAug 23, 2025
  If the trouble with your Mitsubishi Electric Air Conditioner is reoccurring, you should determine the cause and take corrective action according to the self-diagnosis action table. Additionally, conduct troubleshooting to ascertain the cause of the issue, referring to the troubleshooting guide for inferior phenomena.
B
Barbara MccarthyAug 25, 2025
What does it mean if an error code appears on my Mitsubishi Electric PKA-RP50HAL Air Conditioner remote?
- D
  debramitchellAug 26, 2025
  An error code appearing on the remote controller display indicates that the protection devices have been activated to safeguard the Mitsubishi Electric Air Conditioner.
L
lisa66Aug 27, 2025
What to do if Mitsubishi Electric Air Conditioner doesn't turn on after stopping?
- R
  Ryan BowenAug 27, 2025
  If your Mitsubishi Electric Air Conditioner doesn't restart immediately after being turned off, even when pressing the ON/OFF button, wait approximately 3 minutes before trying again.
W
Wendy DunlapAug 28, 2025
What to do if Mitsubishi Electric PKA-RP50HAL operates without pressing the ON/OFF button?
- P
  Patricia ConradAug 28, 2025
  If your Mitsubishi Electric Air Conditioner is running without you pressing the ON/OFF button, consider the following possibilities: * Check if the on timer is set. If it is, press the ON/OFF button to stop operation. * Determine whether the air conditioner is connected to a central remote controller. If so, consult the individuals who manage the air conditioner. * See if “ ” appears in the remote controller display. If it does, consult the people in charge of the air conditioner. * Verify whether the auto recovery feature from power failures has been activated. If it has, press the ON/OFF button to stop operation.
S
susanhuntAug 29, 2025
Why does my Mitsubishi Electric Air Conditioner stop without pressing the ON/OFF button?
- S
  Sandra OrrAug 29, 2025
  If your Mitsubishi Electric Air Conditioner is stopping on its own, without you pressing the ON/OFF button, consider these possibilities: * Check if the off timer is set. If it is, press the ON/OFF button to restart operation. * Determine whether the air conditioner is connected to a central remote controller. If so, consult the individuals who manage the air conditioner. * See if “ ” appears in the remote controller display. If it does, consult the people in charge of the air conditioner.
M
Melissa WallaceAug 31, 2025
Why does Mitsubishi Electric PKA-RP50HAL stop before reaching set temperature in heating mode?
- S
  Samantha NorrisAug 31, 2025
  During heating mode, if the outdoor temperature is low and the humidity is high, frost may form on the outdoor unit of your Mitsubishi Electric Air Conditioner. When this happens, the unit will perform a defrosting operation. Normal operation should resume after about 10 minutes.
T
Tonya CraneSep 1, 2025
Why is there mist coming from my Mitsubishi Electric PKA-RP50HAL?
- A
  Ashley BlackburnSep 1, 2025
  A white mist or vapor might be emitted from the indoor unit of your Mitsubishi Electric Air Conditioner under these conditions: * If the indoor temperature and humidity are high, this can occur when operation starts. * During defrosting mode, cool airflow may blow down and appear like a mist.
M
Meghan AllenSep 3, 2025
Why does the airflow direction change on my Mitsubishi Electric PKA-RP50HAL Air Conditioner?
- A
  Angela MannSep 3, 2025
  The airflow direction on your Mitsubishi Electric Air Conditioner may change automatically during operation: * During cooling mode, the vanes automatically move to the horizontal (down) position after 1 hour when the down (horizontal) airflow direction is selected. * During heating mode, the vanes automatically move to the horizontal airflow direction when the airflow temperature is low or during defrosting mode.
J
jessicabartlettSep 4, 2025
Why is my Mitsubishi Electric PKA-RP50HAL Air Conditioner leaking water outside?
- F
  fcarpenterSep 4, 2025
  Water or vapor may be emitted from the outdoor unit of your Mitsubishi Electric Air Conditioner due to these reasons: * During cooling mode, water may form and drip from the cool pipes and joints. * During heating mode, water may form and drip from the heat exchanger. * During defrosting mode, water on the heat exchanger evaporates and water vapor may be emitted.

Mitsubishi Electric PKA-RP50HAL Specifications

General

Type	Wall Mounted
Cooling Capacity	5.0 kW
Refrigerant	R32
Outdoor Unit Dimensions (W x H x D)	800 x 550 x 285 mm
Outdoor Unit Noise Level	50 dB(A)
Power Supply	220-240 V, 50 Hz