To Next PageTo Next PageHow to check for open or short in Mitsubishi Electric Air Conditioner?
To troubleshoot an open or short in your Mitsubishi Electric Air Conditioner, measure the resistance between the terminals using the tester.
What to do if I have an open or short in my Mitsubishi Electric PKFY-P32VGM-E Air Conditioner?
To troubleshoot an open or short in your Mitsubishi Electric Air Conditioner, disconnect the connector and then measure the resistance using a tester.
General| Brand | Mitsubishi Electric |
|---|---|
| Model | PKFY-P32VGM-E |
| Category | Air Conditioner |
| Language | English |
Critical safety measures for R407C refrigerant, including piping, sealing, and lubricant use.
Procedures for safe service operations, refrigerant recovery, and system recharging.
Lists the specific tools required for servicing units with R407C refrigerant.
Safety precautions for R410A refrigerant, including piping, sealing, and charging methods.
Lists the specialized tools needed for servicing R410A refrigerant systems.
Guidelines for R410A service operations, including refrigerant recovery, recharging, and filter drier installation.
Identification of indoor unit parts and operation of the wired remote controller.
Technical specifications including power, capacity, dimensions, and pipe sizes.
Specifications for various electrical components like thermistors, motors, and power supply.
Detailed diagrams showing the physical dimensions and installation clearances.
Information on pipe sizes, drain pipe, and installation plate hole details.
Detailed wiring diagram for the indoor unit, including component connections and legends.
Explanation of DIP switch functions for mode, capacity, and address setting.
Diagram illustrating the refrigerant circuit and specifications for gas and liquid pipe diameters.
Methods for checking thermistors and motors for proper resistance values.
Procedures for checking the linear expansion valve, including resistance and operation.
Step-by-step instructions for removing the lower side of the indoor unit and the front panel.
Procedures for accessing and removing the indoor controller board and its associated parts box.
List and diagrams of structural parts for the indoor unit models.
Detailed list of electrical parts with their part numbers, specifications, and wiring symbols.
List of structural parts that comply with RoHS standards.
List of electrical components that meet RoHS compliance requirements.
