To Next PageTo Next PageWhat to do if the trouble is reoccurring on my Mitsubishi Electric PLA Air Conditioner?
If the trouble with your Mitsubishi Electric Air Conditioner is reoccurring, determine what is wrong and take corrective action according to the self-diagnosis action table. Also, conduct troubleshooting to ascertain the cause of the problem.
What to do if the trouble is not reoccurring on my Mitsubishi Electric PLA Air Conditioner?
If the trouble with your Mitsubishi Electric Air Conditioner is not reoccurring, consider that temporary defects may be the cause, such as the activation of protection devices in the refrigerant circuit (including the compressor), poor wiring connections, or noise. Re-check the symptom, and check the installation environment, refrigerant amount, weather when the trouble occurred, matters related to wiring, etc. Also, reset check code logs and restart the unit after finishing service. If there is no abnormality in electrical component, controller board, remote controller, etc., there is no problem.
What to do if the trouble is not logged on my Mitsubishi Electric PLA Air Conditioner?
If the trouble is not logged on your Mitsubishi Electric Air Conditioner, re-check the abnormal symptom. Conduct troubleshooting to ascertain the cause of the trouble. If the cause is not ascertained, continue to operate unit for the time being. Also, check that there is no abnormality concerning parts such as electrical components, the controller board, or the remote controller.
General| Brand | Mitsubishi Electric |
|---|---|
| Model | PLA Series |
| Category | Air Conditioner |
| Language | English |
Essential safety rules to follow before servicing.
Precautions for handling R410A refrigerant and related tools.
Identifies parts of the indoor unit and their functions.
General approach to troubleshooting and error code summary.
Procedure for diagnosing malfunctions using the remote controller.
Table detailing error codes, causes, and countermeasures.
