To Next PageTo Next Page
Need help?Do you have a question about the Mitsubishi Electric PUMY-P140VKM1 and is the answer not in the manual?
General| Model | PUMY-P140VKM1 |
|---|---|
| Category | Air Conditioner |
| Type | Heat Pump |
| Cooling Capacity | 14.0 kW |
| Heating Capacity | 16.0 kW |
| Refrigerant | R410A |
| Operating Temperature Range (Cooling) | -5°C to 46°C |
| Indoor Units Connectable | Up to 8 |
| Operating Temperature Range (Heating) | -20°C to 15.5°C |
Outlines specifications for outdoor units, including capacity, power supply, and operating temperature ranges.
Detailed technical specifications for outdoor units including capacity, temperature ranges, and electrical characteristics.
Explains how to adjust capacity based on air conditions, piping length, and defrosting.
Illustrates the main wiring diagram for outdoor units and explains the meaning of various symbols used.
Explains system control methods, including M-NET and MA remote controller operations and wiring examples.
Lists essential checks to perform before initiating a test run of the air conditioning system.
Lists common errors during test runs and their corresponding corrective actions and remedies.
Details specific error codes (0403, 1102, 1300, etc.) and their diagnosis and remedy steps.
Provides precautions against refrigerant leakage, including confirmation procedures for R410A concentration.
Details the step-by-step procedure for disassembling the outdoor unit, including removing panels, motors, electrical parts, and sensors.
