Mitsubishi Electric RD77GF8 - Page 22

20
1 FUNCTIONS
1.3 Cyclic Transmission
Coexistence of local stations and the other slave stations (other than local stations)
The data of all slave stations are also stored in the local stations in the same way as the master station.
*1 There is no RX or RY depending on the slave module.
Setting method
The link devices can be assigned in "Network Configuration Settings" under "Basic Settings". (Page 67 Network
Configuration Settings)
The link refresh is assigned in "Refresh Settings" under "Basic Settings". (Page 70 Refresh Settings)
RX, RWr
RY, RWw
*1
RX, RWr
*1
RY, RWw
*1
RX, RWr
RY, RWw
RX, RWr
RY, RWw
Master
station
(Simple
Motion
module)
Slave station
Station No.1
Slave station
Station No.2 Station No.3Station No.0
Local station
Area where data is sent to
other stations
Range of the
station No.1
sending data
Range of the
station No.2
sending data
Range of the
sending data to
the station No.1
Range of the
sending data to
the station No.2
Range of the
sending data to
the station No.3
CPU module
Station
No.1
Station
No.2
Station
No.1
Station
No.2
Station
No.1
Station
No.2
Station
No.3
Station
No.1
Station
No.2
Station
No.3
Device
Device
*1
Range of the
station No.3
sending data