Need help?Do you have a question about the Mitsubishi Electric R60AD8-G and is the answer not in the manual?
General| Brand | Mitsubishi Electric |
|---|---|
| Model | R60AD8-G |
| Category | Controller |
| Language | English |
Conditions for using the product in SIL2 mode, emphasizing accident prevention.
Describes the classification of modes for the R60AD8-G module.
Explains how to enable and disable the safety module for SIL2 mode operation.
Explains the processing order of various functions for the A/D converter module.
Describes the function to switch the input range of an analog input for each channel.
Controls whether to enable or disable A/D conversion for each channel to reduce cycles.
Details the sampling, averaging, and filtering processes for A/D conversion.
Performs scale conversion on digital output values to a specified range between upper and lower limits.
Describes process alarms and rate alarms for the alert output function.
Outputs an alarm when an analog input value exceeds the preset range.
Adds a set conversion value to a digital output and stores the result in buffer memory.
Fixes digital operation value to max/min when current/voltage exceeds input range.
Subtracts a reference value from digital operation value and stores the result.
Stores the maximum and minimum values of digital operation values for each channel.
Logs digital output or operation values, storing data points and allowing stop by trigger.
Executes an interrupt program when an interrupt factor like input error or alert output is detected.
Records errors and alarms occurring in the A/D converter module into buffer memory.
Collects errors, alarms, or operations as event information in the remote head module.
Provides functionality to back up, save, and restore offset/gain values for user range settings.
Allows setting buffer memory addresses same as MELSEC-Q series modules for program reuse.
Allows setting parameters for each channel, eliminating programming needs.
Configures settings for specific functions like scaling, shift, and alert outputs.
Configures interrupt settings for detecting events like errors or alerts.
Sets buffer memory area refresh for A/D converter module, eliminating programming needs.
Guides troubleshooting by checking RUN, ERR, and ALM LED statuses.
Provides access to "Module Diagnostics" for detailed error and status information.
Offers solutions based on observed symptoms like LED behavior or module status.
Provides a reference list of error codes, their descriptions, causes, and corrective actions.
Lists and explains alarm codes that may occur during operation.
Explains the naming structure for I/O signals and buffer memory areas using module labels.
Lists and details the input and output signals assigned to the CPU module.
Lists buffer memory addresses and their corresponding data types and default values.
Describes the system configurations for using the R60AD8-G in SIL2 mode.
Identifies and describes the physical parts of the R60AD8-G module.
Details the performance specifications and function list of the R60AD8-G in SIL2 mode.
Describes procedures required before operating the R60AD8-G in SIL2 mode.
Explains the system configurations for using the R60AD8-G in SIL2 mode.
Provides instructions and precautions for installing and wiring the R60AD8-G module.
Describes the functions available for the R60AD8-G in SIL2 mode and their setting procedures.
Details the parameters that can be set for the R60AD8-G module.
Provides a program example to operate the R60AD8-G in SIL2 mode.
Describes inspections to be performed for using the R60AD8-G in SIL2 mode.
Describes errors that may occur and their troubleshooting for the R60AD8-G.
Provides supplementary information for SIL2 mode operation.
To Next Page