Mitsubishi Electric R60AD8-G - 2.3 Interrupt Setting

96
2 PARAMETER SETTINGS
2.1 Basic Setting
2 PARAMETER SETTINGS
Set the parameters of each channel.
Setting parameters here eliminates the need to program them.
2.1 Basic Setting
Setting procedure
Open "Basic setting" of the engineering tool.
1. Start Module parameter.
[Navigation window]  [Parameter]  [Module Information]  Module model name [Module Parameter]  [Basic
setting]
2. Click the item to be changed to enter the setting value.
• Item where a value is selected from the pull-down list
Click [] button of the item to be set, and from the pull-down list that appears, select the value.
• Item where a value is entered into the text box
Double-click the item to be set to enter the numeric value.