Mitsubishi Electric R60AD8-G - Appendices (Sil2 Mode); Appendix 8 I;O Signals; List of I;O Signals

APPX
Appendix 8 I/O Signals
323
A
APPENDICES (SIL2 MODE)
Appendix 8 I/O Signals
List of I/O signals
The following tables are lists of I/O signals for the R60AD8-G in SIL2 mode.
• The I/O signals (X/Y) described below show the case that the start I/O number of the R60AD8-G is set to
"0".
• Do not use the "use prohibited" signals in the following tables since they are used by the system. If users
use (turn on) the signals, the functions of the R60AD8-G cannot be guaranteed.
Input signal
Output signal
Device number Signal name
X0 to XF Use prohibited
Device number Signal name
Y0 to YF Use prohibited