Mitsubishi Electric R60AD8-G - Input Signal Error Detection Function

38
1 FUNCTIONS
1.7 Input Signal Error Detection Function
1.7 Input Signal Error Detection Function
This function outputs an alarm when an analog input value exceeds the preset range.
Errors can be cleared using the input signal error detection auto-clear enable/disable setting. For details, refer
to the following.
Page 41 Clearing input signal errors
ON
ON
ON
OFF
OFF
OFF
OFF
OFF
OFF
OFF
ON
Controlled by the A/D converter module
Controlled by the program
Input signal error detection
upper limit value
Input signal error detection
lower limit value
Analog input value
Time
Error
detection
Normal
input value
Error
detection
Detection range
Out of detection range
Included
CH1 Analog
input value
CH2 Analog
input value
'CH2 Input signal error detection flag'
(Un\G40, b1)
'CH1 Input signal error detection flag'
(Un\G40, b0)
'Input signal error detection signal'
(XC)
'Error clear request' (YF)