To Next PageTo Next PageWhy does my Mitsubishi Electric TRANE CITY MULTI TPKFYP KM142 cause an unpleasant odor in the room?
Your Mitsubishi Electric Air Conditioner might be drawing in air containing gases from walls, carpeting, and furniture, as well as odors trapped in clothing, and then recirculating this air back into the room.
What to do if an error code appears on Mitsubishi Electric Air Conditioner?
If an error code appears on your Mitsubishi Electric Air Conditioner's remote controller display, the protection devices have been activated to safeguard the air conditioner. Do not attempt to repair it yourself. Immediately turn off the power and consult your dealer.
Why is my Mitsubishi Electric Air Conditioner remote controller display not working?
If the wireless remote controller display for your Mitsubishi Electric Air Conditioner is blank or faint, or if signals aren't being received unless you're very close, the batteries are likely low. Replace them and press the Reset button. If nothing appears even after replacing the batteries, ensure they are installed correctly, paying attention to the + and – directions.
How to turn on operation indicator on Mitsubishi Electric Air Conditioner?
Turn on the power switch of your Mitsubishi Electric Air Conditioner.
What to do if Mitsubishi Electric TRANE CITY MULTI TPKFYP KM142 Air Conditioner does not operate even though the ON/OFF button is pressed?
Check if the power switch of the indoor unit of your Mitsubishi Electric Air Conditioner is turned off. If so, turn it on.
Why does my Mitsubishi Electric TRANE CITY MULTI TPKFYP KM142 turn on by itself?
If your Mitsubishi Electric Air Conditioner turns on by itself, check if the on timer is set and press the ON/OFF button to stop operation. If connected to a central remote controller or the “ ” symbol appears on the remote, consult the relevant personnel who manage the air conditioner. Also, check if the auto recovery feature from power failures has been enabled, and if so, press the ON/OFF button to stop operation.
What does “ ” mean on my Mitsubishi Electric Air Conditioner remote controller display?
During central control, “ ” appears in the remote controller display of your Mitsubishi Electric Air Conditioner, and operation cannot be started or stopped using the remote controller.
Why does the airflow direction of my Mitsubishi Electric TRANE CITY MULTI TPKFYP KM142 change automatically?
During cooling mode, the vanes automatically move to the horizontal (down) position after 1 hour when the down (horizontal) airflow up/ down direction is selected. During heating mode, the vanes automatically move to the horizontal airflow up/down direction when the airflow temperature is low or during defrosting mode.
Why does my Mitsubishi Electric TRANE CITY MULTI TPKFYP KM142 Air Conditioner stop before reaching the set temperature during heating?
If your Mitsubishi Electric Air Conditioner stops before reaching the set temperature in heating mode, frost may have formed on the outdoor unit due to low outdoor temperatures and high humidity. Normal operation should resume after about 10 minutes.
Why does my Mitsubishi Electric Air Conditioner make cracking sounds?
These sounds in your Mitsubishi Electric Air Conditioner are normal and occur when parts rub against each other due to expansion and contraction from temperature changes.
General| Brand | Mitsubishi Electric |
|---|---|
| Model | TRANE CITY MULTI TPKFYP KM142 Series |
| Category | Air Conditioner |
| Language | English |
