To Next PageTo Next PageWhy does my Mitsubishi Electric Air Conditioner smell bad?
The indoor unit draws in air that contains gases produced from the walls, carpeting, and furniture as well as odors trapped in clothing, and then blows this air back into the room.
What to do if Mitsubishi Electric Air Conditioner does not turn on?
If your Mitsubishi Electric Air Conditioner doesn't turn on even when you press the ON/OFF button, make sure the power switch of the indoor unit is turned on. If it is off, turn it on.
What to do if my Mitsubishi Electric TRANE CITY MULTI TPLFYP EM140 Air Conditioner displays an error code?
If an error code appears on your Mitsubishi Electric Air Conditioner's remote controller display, this means the protection devices have been activated to safeguard the unit. Do not attempt to repair the air conditioner yourself. Immediately turn off the power switch and consult your dealer, providing them with the model name and the error code displayed.
Why Mitsubishi Electric TRANE CITY MULTI TPLFYP EM140 Air Conditioner remote controller not working?
If your Mitsubishi Electric Air Conditioner's wireless remote controller display is blank or faint, or if the indoor unit isn't receiving signals unless the remote is very close, the batteries are likely low. Replace the batteries and press the Reset button. If nothing appears after replacing the batteries, ensure they are installed correctly, paying attention to the + and – directions.
Why is my Mitsubishi Electric TRANE CITY MULTI TPLFYP EM140 turning on by itself?
If your Mitsubishi Electric Air Conditioner starts running on its own, first check if the on timer is set and press the ON/OFF button to stop operation. If the air conditioner is connected to a central remote controller, consult the people who control the air conditioner. If “ ” or “ CENTRAL ” appear in the remote controller display, consult the people who control the air conditioner. Also, if the auto recovery feature from power failures has been set, press the ON/OFF button to stop operation.
Why does my Mitsubishi Electric TRANE CITY MULTI TPLFYP EM140 Air Conditioner keep turning off?
If your Mitsubishi Electric Air Conditioner shuts down unexpectedly, see if the off timer is set and press the ON/OFF button to restart operation. If the air conditioner is connected to a central remote controller, consult the people who control the air conditioner. If “ ” or “ CENTRAL ” appear in the remote controller display, consult the people who control the air conditioner.
Why do the vanes move past the set position on my Mitsubishi Electric TRANE CITY MULTI TPLFYP EM140 Air Conditioner?
When the airflow direction is changed, the vanes move to the set position after detecting the base position in your Mitsubishi Electric Air Conditioner.
Why is my Mitsubishi Electric TRANE CITY MULTI TPLFYP EM140 emitting mist?
If the indoor temperature and the humidity are high, this condition may occur when operation starts. Also, during defrosting mode, cool airflow may blow down and appear like a mist.
Why is my Mitsubishi Electric TRANE CITY MULTI TPLFYP EM140 Air Conditioner making a cracking sound?
These sounds can be heard when parts rub against each other due to expansion and contraction from temperature changes in your Mitsubishi Electric Air Conditioner.
Why Mitsubishi Electric TRANE CITY MULTI TPLFYP EM140 Air Conditioner is not blowing warm air immediately?
Warm air does not blow from your Mitsubishi Electric Air Conditioner until the indoor unit has sufficiently warmed up.
General| Brand | Mitsubishi Electric |
|---|---|
| Model | TRANE CITY MULTI TPLFYP EM140 Series |
| Category | Air Conditioner |
| Language | English |
Summarizes critical warnings and cautions for safe operation and unit protection.
Guidance on how to properly dispose of the air conditioning unit.
Identifies and describes the parts of the indoor unit.
Details the buttons, display, and functions of the wired remote controller.
Explains the meaning of various icons shown on the wired remote controller display.
Describes the interface, display, and functions of the Simple MA remote controller.
Instructions for starting and stopping the indoor unit operation.
Details how to select and use different operation modes like Cool, Auto, Heat.
Procedures for adjusting the desired temperature for various modes.
How to adjust the fan speed for optimal comfort and airflow.
Guides on setting vane direction, swing, and ventilation options.
Detailed steps for setting manual vane angles for specific outlets.
Configuration of the 3D i-see sensor for intelligent airflow and energy saving.
Settings for energy saving based on occupancy and auto-off timers.
How to enable seasonal airflow adjustments for cooling and heating.
Explains the operation patterns for the Lossnay ventilation system.
Steps to select operation modes and explanations of AUTO/SETBACK modes.
How to set cooling and heating temperatures using the Simple MA remote.
Adjusting fan speed and vane direction with the Simple MA remote.
How to set limits on the adjustable temperature ranges for operation modes.
Instructions for cleaning or replacing air filters and resetting the filter indicator.
