Why does the airflow direction change on my Mitsubishi Electric Trane NTXAMT18A112AA, or why can't I set it?
During Heat mode, the vanes automatically move to the horizontal airflow direction when the airflow temperature is low or during defrosting mode.
Why do the vanes move past the set position when I change the airflow direction on my Mitsubishi Electric Trane NTXAMT18A112AA Air Conditioner?
When the airflow direction is changed, the vanes move to the set position after detecting the base position.
What does “PLEASE WAIT” mean on my Mitsubishi Electric Air Conditioner remote controller display?
The initial settings are being performed. Wait approximately 3 minutes.
What does “ ” mean on my Mitsubishi Electric Trane NTXAMT18A112AA remote controller display?
During central control, “ ” appears in the remote controller display and air conditioner operation cannot be started or stopped using the remote controller.
Why is draining water or a motor rotation sound heard in my Mitsubishi Electric Trane NTXAMT18A112AA?
When cooling operation stops, the drain pump operates and then stops. Wait approximately 5 minutes.
General| Model Number | NTXAMT18A112AA |
|---|---|
| Category | Air Conditioner |
| Phase | 1 |
| Voltage | 208/230V |
| Refrigerant | R410A |
| Cooling Capacity | 18, 000 BTU/h |
| HSPF Rating | 10 HSPF |
To Next Page
