To Next PageTo Next PageWhy does the airflow direction change on my Mitsubishi Electric Trane NTXAMT36A112AA, or why can't I set it?
During Heat mode, the vanes automatically move to the horizontal airflow direction when the airflow temperature is low or during defrosting mode.
Why do the vanes move past the set position when I change the airflow direction on my Mitsubishi Electric Air Conditioner?
When the airflow direction is changed, the vanes move to the set position after detecting the base position.
What does “PLEASE WAIT” mean on my Mitsubishi Electric Trane NTXAMT36A112AA Air Conditioner remote controller display?
The initial settings are being performed. Wait approximately 3 minutes.
What does “ ” mean on my Mitsubishi Electric Trane NTXAMT36A112AA Air Conditioner remote controller display?
During central control, “ ” appears in the remote controller display and air conditioner operation cannot be started or stopped using the remote controller.
Why is draining water or a motor rotation sound heard in my Mitsubishi Electric Air Conditioner?
When cooling operation stops, the drain pump operates and then stops. Wait approximately 5 minutes.
General| Model | NTXAMT36A112AA |
|---|---|
| Phase | 1 |
| Compressor Type | Inverter |
| Cooling Capacity | 36000 BTU/h |
| Heating Capacity | 36000 BTU/h |
| Voltage | 208/230V |
| Refrigerant | R410A |
| Outdoor Unit Noise Level | 56 dB |
Details critical warnings to prevent severe injury, death, or property damage.
Provides cautions to prevent damage to the air conditioner unit.
Explains how to select different operating modes like Cool, Heat, and Fan.
Solutions for when the air conditioner is not heating or cooling effectively.
Guidance on interpreting and responding to error codes on the remote controller.
Detailed technical specifications for NTXAMT12, 18, 24, 30, 36A112AA models.
