Main Menu
Setup Menu
Figure 1
Use the Setup menu to sebct Engiish or Spanish as
the ianguage for the menus and on-screen dispiays.
Memorize the avaiiabb channeis for antennas or came
connected to the ANT-1 and ANT-2 inputs. Manually
set the time for the TV, or sebct Auto and the TV will
automatically set the time based upon Extended Data
Service (XDS) time data. This time data is usually
broadcast by your iocai PBS stafion. This menu is aiso
used to set the TV timer, and reset the iamp reminder.
The TV's software version is dispiayed on this screen.
Figure I. Main menu, Setup selected
ChanneJ Menu
Figure 4
Edit channeb for ANT-1 and ANT-2. After memorization,
if a channei dispiays as digital and analog, you can
choose to see the channel digitally every time it is
sebcted. Manually add or delete channels from memory,
name channels or add your favorite channels to a SQV
(SuperQuickView TM) list. Displays signal strength of
currently tuned digital channeb.
Figure 4. Main menu, Channel selected
Captions Menu
Figure 5
Display Closed Captions if sent by the broadcaster,
select settings for analog or digital captions.
NetOommand Menu
Figure 2
Add, change, review or delete NetCommand® settings
and devices. Enabb/disabb TV Guide On Screen® or
change ZIP code and input selection settings. Change
the order of icons on the Device Selection menu. Turn
the transport menu of L
Figure 2. Main menu, NetCornrnand selected
Figure 5. Main menu, Captions selected
V-Chip Lock Menu
Figure 6
Block or allow programing based upon rating signals sent
by the broadcast station, lock by time, or lock the front
panel buttons.
Record Menu
Figure 3
Set up and view recordings and recording defaults. View
your customized Record List. If you have more than one
digital recording device connected, use this menu to
change the default digital Record To device. Set analog
recording size.
Figure 3. Main menu, Record selected
Figure 6. Main menu, V-Chip Lock selected
Audio/Video Menu
Figure 7
Reset the AiV Memory to return to the original factory
AiV settings for a selected device. Customize the
individual audio and video settings. Display a blue
screen when viewing a device with no signal, enable/
disable Film Mode, or turn the TV speakers on or ofL
Figure 7.Main menu, Audio/Video selected
(}6 Chapter 5. TV Menu Operations
To Next Page
Loading...
Need help?
General
