Mitsubishi Electric XL2550U User Manual (English)

Questions and Answers:

L
Leslie JonesAug 2, 2025
What to do if Mitsubishi Electric Projector says no signal?
- T
  Teresa RobertsAug 2, 2025
  If your Mitsubishi Electric Projector displays “NO SIGNAL”, ensure the connected device is powered on and functioning correctly. Verify that the external device is outputting signals and that the cable connecting it to the projector isn’t defective. Confirm that the projector is connected to the external device using the correct terminals and that the connected device is correctly selected as the input source. If you're using an extension cord, replace it with the supplied cable to check for proper image projection. If the image is then projected correctly, use an RGB signal amplifier along with the extension cord.
A
Amy DayAug 6, 2025
Why does my Mitsubishi Electric XL2550U keep turning off?
- M
  Mary SmithAug 6, 2025
  If your Mitsubishi Electric Projector's power turns off unexpectedly, this may occur when the intake vent and/or exhaust vents are blocked. Remove any objects blocking these vents and then follow this procedure: 1. Wait for the intake fan and/or exhaust fan to stop (until the STATUS indicator goes out). 2. Unplug the power cord from the wall outlet. 3. Wait about 10 minutes. 4. Plug the power cord back into the wall outlet. 5. Press the POWER button. When the STATUS indicator is steady red, it indicates that the lamp should be replaced. Also, ensure that AUTO POWER OFF is set to OFF. If the lamp has deteriorated, it may go out after a while.
M
Mary BurnsAug 10, 2025
Why is my Mitsubishi Electric Projector remote not working?
- T
  Tim MercerAug 11, 2025
  If the remote control for your Mitsubishi Electric Projector isn’t functioning easily or at all, ensure that the batteries are correctly loaded and not weak. Also, check that the remote control sensor isn’t exposed to direct sunlight or fluorescent light. Use the remote control within its operation range, and position it at least 10 cm away from the projector.
M
Mark ReynoldsAug 15, 2025
How to fix Mitsubishi Electric XL2550U Projector menu if it can't be used?
- D
  David MillerAug 15, 2025
  If the menu on your Mitsubishi Electric Projector can’t be used, it may be due to the microcomputers inside the projector operating incorrectly because of noise. To resolve this, press the POWER button to turn off the lamp and unplug the power cord from the wall outlet. Wait about 10 minutes, plug the power cord back in, and try again.
R
randalljohnsonAug 19, 2025
What does 'TEMPERATURE!!' mean on Mitsubishi Electric Projector?
- S
  Scott FisherSep 12, 2025
  The “TEMPERATURE!!” indication on your Mitsubishi Electric Projector appears when the ambient temperature rises high, which can cause the lamp to go out. Eliminate any causes of the rise in the ambient temperature. This indication also appears when the air inlet or outlet grille is blocked. Remove any objects blocking the air inlet or outlet grille.
B
Briana RiddleAug 23, 2025
How to fix obscured projected images on Mitsubishi Electric Projector?
- Y
  Yolanda MartinAug 23, 2025
  If projected images from your Mitsubishi Electric Projector are obscured, match the output resolution of your computer with the resolution of the projector. For instructions on how to change the output resolution of your computer, contact the manufacturer of your computer. Also, some images and texts appear obscured during keystone adjustment; in such cases, use the projector without applying the keystone adjustment.

Mitsubishi Electric XL2550U Specifications

General

Brand	Mitsubishi Electric
Model	XL2550U
Category	Projector
Language	English

Summary

Important Safeguards

Preparing Your Projector

Checking Accessories

Lists and verifies all included projector accessories to ensure completeness of the package contents.

Remote Control

Detailed explanation of the projector's remote control layout, button functions, and operational guidance.

Using the Remote Control

Operational Range of the Remote Control

Specifies the effective distance, reception angles, and environmental factors affecting remote control operation.

Setting Up Your Projector

Setting Up the Screen

Instructions on how to position the projection screen for optimal image alignment and viewing quality.

Adjusting the Projection Angle

Guidance on adjusting the projector's tilt using adjustment feet for proper image alignment on the screen.

Viewing Computer Images

Connecting the Projector to a Computer

Step-by-step instructions for establishing a connection between the projector and a computer for image display.

Projecting Images

Procedures for starting, managing, and stopping image projection from a connected computer.

Viewing Video Images

Connecting the Projector to Video Equipment

Steps for connecting various video sources like VCRs, DVD players, and TV tuners to the projector.

Projecting Images

How to start, manage, and stop image projection from connected video equipment.

Setting the Aspect Ratio

Options for adjusting the image's width-to-height ratio to match the source content for optimal viewing.

Menu Operation

Installation Menu

Settings related to projector installation, ceiling mounting, wall screen adjustments, and power management.

Feature Menu

Access to various projector features like aspect ratio, password protection, and input signal selection.

Signal Menu

Options for adjusting input signal parameters, resolution, tracking, and other display-related settings.

Adjusting Projected Images

Adjust Brightness and Color

Procedures for modifying image brightness, contrast, color thickness, tint, and sharpness for optimal viewing.

Adjust Tone of White (Color Temp.)

Settings to fine-tune the white balance and color temperature, including customizing user presets.

Advanced Features

Password Function

How to set up and use the projector's password protection feature for security and restricted operation.

Picture in Picture (PinP)

Explanation of the PinP mode for displaying multiple video sources simultaneously on the screen.

Indicators

Replacing the Lamp

To Replace the Lamp

Detailed instructions and safety precautions for replacing the projector lamp, including lamp life intervals.

Maintenance

Cleaning

Guidelines for cleaning the projector's air filter, body, ventilation slots, and lens to ensure optimal performance.

Troubleshooting

No Image Appears on the Screen

Solutions for issues where no image is displayed, covering power, connections, and indicator status.

Images are Not Displayed Correctly

Troubleshooting steps for distorted, flickering, or incorrect image display, including resolution and signal issues.

Specifications

Connectors

Details on the types, pin configurations, and signal compatibility of the projector's various input/output connectors.

MITSUBISHI Projector Contact Information

Related product manuals

Mitsubishi Electric XL8U

34 pages

Mitsubishi Electric XL5U

34 pages

Mitsubishi Electric XL5950U

34 pages

Mitsubishi Electric XL1550U

47 pages

Mitsubishi Electric XD510U

34 pages

Mitsubishi Electric XD430U

30 pages

Mitsubishi Electric XD250U

42 pages

Mitsubishi Electric XD205U

30 pages

Mitsubishi Electric XD560U

60 pages

Mitsubishi Electric XD8100U

75 pages

Mitsubishi Electric DLP XD460U

40 pages

Mitsubishi Electric DLP XD700U

61 pages

Mitsubishi Electric XL2550U User Manual

Table of Contents

Questions and Answers:

Mitsubishi Electric XL2550U Specifications

Summary

Important Safeguards

Preparing Your Projector

Checking Accessories

Remote Control

Using the Remote Control

Operational Range of the Remote Control

Setting Up Your Projector

Setting Up the Screen

Adjusting the Projection Angle

Viewing Computer Images

Connecting the Projector to a Computer

Projecting Images

Viewing Video Images

Connecting the Projector to Video Equipment

Projecting Images

Setting the Aspect Ratio

Menu Operation

Installation Menu

Feature Menu

Signal Menu

Adjusting Projected Images

Adjust Brightness and Color

Adjust Tone of White (Color Temp.)

Advanced Features

Password Function

Picture in Picture (PinP)

Indicators

Replacing the Lamp

To Replace the Lamp

Maintenance

Cleaning

Troubleshooting

No Image Appears on the Screen

Images are Not Displayed Correctly

Specifications

Connectors

MITSUBISHI Projector Contact Information

Related product manuals