EN-23
RC-HY20/40-W – at your service
Menu 2.9.2 - hot water recirc. (accessory required)
hot water recirc. 2.9.2
operating time
downtime min
min
period 1
period 2
period 3
operating time
Setting range: 1 – 60 min
Default value: 60 min
downtime
Setting range: 0 – 60 min
Default value: 0 min
Set the hot water circulation for up to three periods per day
here. During the set periods the hot water circulation pump will
run according to the settings above.
"operating time" decide how long the hot water circulation
pump must run per operating instance.
"downtime" decide how long the hot water circulation pump
must be stationary during operating instances.
Hot water circulation is activated in menu 5.4 "soft inputs and
outputs".
To Next Page
Loading...
