Mitsubishi Heavy Industries FDCM100VNX-W - Get Information

EN-24
RC-HY20/40-W – at your service
Menu 3.1 - service info
Information about the actual operating status of the installation
(e.g. current temperatures etc.) can be obtained here. But no
changes can be made.
The information is on several pages. Turn the control knob to
scroll between the pages.
service info 3.1
op. prioritisation
hot water charging
hot water top
calculated flow temp.
degree minutes
outdoor temp.
charge pump speed
status
AA25
hot water
49.0 °C
52.0 °C
5.8 °C
-700
-5.6 °C
57 %
ext heat. med. pump
runs
HeatingCompressor
Hot waterAddition
Cooling
Heating
medium
pump
(orange)
compressor info 3.2
status:
number of starts:
total operating time:
- of which hot water:
heating
195 hrs
5 hrs
slave 1
s2 s3 s4 s5 s6 s7 s8
service info
service info 3.1
op. prioritisation
hot water charging
hot water top
calculated flow temp.
degree minutes
outdoor temp.
charge pump speed
status
AA25
hot water
49.0 °C
52.0 °C
5.8 °C
-700
-5.6 °C
57 %
ext heat. med. pump
runs
Information about the actual operat-
ing status of the installation (e.g. cur-
rent temperatures etc.) can be ob-
tained here. No changes can be made.
The information is on several pages.
Turn the control knob to scroll
between the pages.
Symbols in this menu:
HeatingCom-
pressor
Hot wa-
ter
Addi-
tion
PoolCooling
Ventila-
tion
Heating
medium
pump
(or-
ange)
Menu
3.1
compressor info
compressor info 3.2
status:
number of starts:
total operating time:
- of which hot water:
heating
195 hrs
5 hrs
slave 1
s2 s3 s4 s5 s6 s7 s8
Information about the compressor’s
operating status and statistics can be
obtained here. No changes can be
made.
The information is on several pages.
Turn the control knob to scroll
between the pages.
Menu
3.2
51NIBE™ SMO 40Chapter 3 | SMO 40 – at your service
service info
service info 3.1
op. prioritisation
hot water charging
hot water top
calculated flow temp.
degree minutes
outdoor temp.
charge pump speed
status
AA25
hot water
49.0 °C
52.0 °C
5.8 °C
-700
-5.6 °C
57 %
ext heat. med. pump
runs
Information about the actual operat-
ing status of the installation (e.g. cur-
rent temperatures etc.) can be ob-
tained here. No changes can be made.
The information is on several pages.
Turn the control knob to scroll
between the pages.
Symbols in this menu:
HeatingCom-
pressor
Hot wa-
ter
Addi-
tion
PoolCooling
Ventila-
tion
Heating
medium
pump
(or-
ange)
Menu
3.1
compressor info
compressor info 3.2
status:
number of starts:
total operating time:
- of which hot water:
heating
195 hrs
5 hrs
slave 1
s2 s3 s4 s5 s6 s7 s8
Information about the compressor’s
operating status and statistics can be
obtained here. No changes can be
made.
The information is on several pages.
Turn the control knob to scroll
between the pages.
Menu
3.2
51NIBE™ SMO 40Chapter 3 | SMO 40 – at your service
service info
service info 3.1
op. prioritisation
hot water charging
hot water top
calculated flow temp.
degree minutes
outdoor temp.
charge pump speed
status
AA25
hot water
49.0 °C
52.0 °C
5.8 °C
-700
-5.6 °C
57 %
ext heat. med. pump
runs
Information about the actual operat-
ing status of the installation (e.g. cur-
rent temperatures etc.) can be ob-
tained here. No changes can be made.
The information is on several pages.
Turn the control knob to scroll
between the pages.
Symbols in this menu:
HeatingCom-
pressor
Hot wa-
ter
Addi-
tion
PoolCooling
Ventila-
tion
Heating
medium
pump
(or-
ange)
Menu
3.1
compressor info
compressor info 3.2
status:
number of starts:
total operating time:
- of which hot water:
heating
195 hrs
5 hrs
slave 1
s2 s3 s4 s5 s6 s7 s8
Information about the compressor’s
operating status and statistics can be
obtained here. No changes can be
made.
The information is on several pages.
Turn the control knob to scroll
between the pages.
Menu
3.2
51NIBE™ SMO 40Chapter 3 | SMO 40 – at your service
service info
service info 3.1
op. prioritisation
hot water charging
hot water top
calculated flow temp.
degree minutes
outdoor temp.
charge pump speed
status
AA25
hot water
49.0 °C
52.0 °C
5.8 °C
-700
-5.6 °C
57 %
ext heat. med. pump
runs
Information about the actual operat-
ing status of the installation (e.g. cur-
rent temperatures etc.) can be ob-
tained here. No changes can be made.
The information is on several pages.
Turn the control knob to scroll
between the pages.
Symbols in this menu:
HeatingCom-
pressor
Hot wa-
ter
Addi-
tion
PoolCooling
Ventila-
tion
Heating
medium
pump
(or-
ange)
Menu
3.1
compressor info
compressor info 3.2
status:
number of starts:
total operating time:
- of which hot water:
heating
195 hrs
5 hrs
slave 1
s2 s3 s4 s5 s6 s7 s8
Information about the compressor’s
operating status and statistics can be
obtained here. No changes can be
made.
The information is on several pages.
Turn the control knob to scroll
between the pages.
Menu
3.2
51NIBE™ SMO 40Chapter 3 | SMO 40 – at your service
service info
service info 3.1
op. prioritisation
hot water charging
hot water top
calculated flow temp.
degree minutes
outdoor temp.
charge pump speed
status
AA25
hot water
49.0 °C
52.0 °C
5.8 °C
-700
-5.6 °C
57 %
ext heat. med. pump
runs
Information about the actual operat-
ing status of the installation (e.g. cur-
rent temperatures etc.) can be ob-
tained here. No changes can be made.
The information is on several pages.
Turn the control knob to scroll
between the pages.
Symbols in this menu:
HeatingCom-
pressor
Hot wa-
ter
Addi-
tion
PoolCooling
Ventila-
tion
Heating
medium
pump
(or-
ange)
Menu
3.1
compressor info
compressor info 3.2
status:
number of starts:
total operating time:
- of which hot water:
heating
195 hrs
5 hrs
slave 1
s2 s3 s4 s5 s6 s7 s8
Information about the compressor’s
operating status and statistics can be
obtained here. No changes can be
made.
The information is on several pages.
Turn the control knob to scroll
between the pages.
Menu
3.2
51NIBE™ SMO 40Chapter 3 | SMO 40 – at your service
service info
service info 3.1
op. prioritisation
hot water charging
hot water top
calculated flow temp.
degree minutes
outdoor temp.
charge pump speed
status
AA25
hot water
49.0 °C
52.0 °C
5.8 °C
-700
-5.6 °C
57 %
ext heat. med. pump
runs
Information about the actual operat-
ing status of the installation (e.g. cur-
rent temperatures etc.) can be ob-
tained here. No changes can be made.
The information is on several pages.
Turn the control knob to scroll
between the pages.
Symbols in this menu:
HeatingCom-
pressor
Hot wa-
ter
Addi-
tion
PoolCooling
Ventila-
tion
Heating
medium
pump
(or-
ange)
Menu
3.1
compressor info
compressor info 3.2
status:
number of starts:
total operating time:
- of which hot water:
heating
195 hrs
5 hrs
slave 1
s2 s3 s4 s5 s6 s7 s8
Information about the compressor’s
operating status and statistics can be
obtained here. No changes can be
made.
The information is on several pages.
Turn the control knob to scroll
between the pages.
Menu
3.2
51NIBE™ SMO 40Chapter 3 | SMO 40 – at your service
Symbols in this menu:
service info 3.1
op. prioritisation
hot water charging
hot water top
calculated flow temp.
degree minutes
outdoor temp.
charge pump speed
status
AA25
hot water
49.0 °C
52.0 °C
5.8 °C
-700
-5.6 °C
57 %
ext heat. med. pump
runs
HeatingCompressor
Hot waterAddition
Cooling
Heating
medium
pump
(orange)
compressor info 3.2
status:
number of starts:
total operating time:
- of which hot water:
heating
195 hrs
5 hrs
slave 1
s2 s3 s4 s5 s6 s7 s8
service info
service info 3.1
op. prioritisation
hot water charging
hot water top
calculated flow temp.
degree minutes
outdoor temp.
charge pump speed
status
AA25
hot water
49.0 °C
52.0 °C
5.8 °C
-700
-5.6 °C
57 %
ext heat. med. pump
runs
Information about the actual operat-
ing status of the installation (e.g. cur-
rent temperatures etc.) can be ob-
tained here. No changes can be made.
The information is on several pages.
Turn the control knob to scroll
between the pages.
Symbols in this menu:
HeatingCom-
pressor
Hot wa-
ter
Addi-
tion
PoolCooling
Ventila-
tion
Heating
medium
pump
(or-
ange)
Menu
3.1
compressor info
compressor info 3.2
status:
number of starts:
total operating time:
- of which hot water:
heating
195 hrs
5 hrs
slave 1
s2 s3 s4 s5 s6 s7 s8
Information about the compressor’s
operating status and statistics can be
obtained here. No changes can be
made.
The information is on several pages.
Turn the control knob to scroll
between the pages.
Menu
3.2
51NIBE™ SMO 40Chapter 3 | SMO 40 – at your service
service info
service info 3.1
op. prioritisation
hot water charging
hot water top
calculated flow temp.
degree minutes
outdoor temp.
charge pump speed
status
AA25
hot water
49.0 °C
52.0 °C
5.8 °C
-700
-5.6 °C
57 %
ext heat. med. pump
runs
Information about the actual operat-
ing status of the installation (e.g. cur-
rent temperatures etc.) can be ob-
tained here. No changes can be made.
The information is on several pages.
Turn the control knob to scroll
between the pages.
Symbols in this menu:
HeatingCom-
pressor
Hot wa-
ter
Addi-
tion
PoolCooling
Ventila-
tion
Heating
medium
pump
(or-
ange)
Menu
3.1
compressor info
compressor info 3.2
status:
number of starts:
total operating time:
- of which hot water:
heating
195 hrs
5 hrs
slave 1
s2 s3 s4 s5 s6 s7 s8
Information about the compressor’s
operating status and statistics can be
obtained here. No changes can be
made.
The information is on several pages.
Turn the control knob to scroll
between the pages.
Menu
3.2
51NIBE™ SMO 40Chapter 3 | SMO 40 – at your service
service info
service info 3.1
op. prioritisation
hot water charging
hot water top
calculated flow temp.
degree minutes
outdoor temp.
charge pump speed
status
AA25
hot water
49.0 °C
52.0 °C
5.8 °C
-700
-5.6 °C
57 %
ext heat. med. pump
runs
Information about the actual operat-
ing status of the installation (e.g. cur-
rent temperatures etc.) can be ob-
tained here. No changes can be made.
The information is on several pages.
Turn the control knob to scroll
between the pages.
Symbols in this menu:
HeatingCom-
pressor
Hot wa-
ter
Addi-
tion
PoolCooling
Ventila-
tion
Heating
medium
pump
(or-
ange)
Menu
3.1
compressor info
compressor info 3.2
status:
number of starts:
total operating time:
- of which hot water:
heating
195 hrs
5 hrs
slave 1
s2 s3 s4 s5 s6 s7 s8
Information about the compressor’s
operating status and statistics can be
obtained here. No changes can be
made.
The information is on several pages.
Turn the control knob to scroll
between the pages.
Menu
3.2
51NIBE™ SMO 40Chapter 3 | SMO 40 – at your service
service info
service info 3.1
op. prioritisation
hot water charging
hot water top
calculated flow temp.
degree minutes
outdoor temp.
charge pump speed
status
AA25
hot water
49.0 °C
52.0 °C
5.8 °C
-700
-5.6 °C
57 %
ext heat. med. pump
runs
Information about the actual operat-
ing status of the installation (e.g. cur-
rent temperatures etc.) can be ob-
tained here. No changes can be made.
The information is on several pages.
Turn the control knob to scroll
between the pages.
Symbols in this menu:
HeatingCom-
pressor
Hot wa-
ter
Addi-
tion
PoolCooling
Ventila-
tion
Heating
medium
pump
(or-
ange)
Menu
3.1
compressor info
compressor info 3.2
status:
number of starts:
total operating time:
- of which hot water:
heating
195 hrs
5 hrs
slave 1
s2 s3 s4 s5 s6 s7 s8
Information about the compressor’s
operating status and statistics can be
obtained here. No changes can be
made.
The information is on several pages.
Turn the control knob to scroll
between the pages.
Menu
3.2
51NIBE™ SMO 40Chapter 3 | SMO 40 – at your service
service info
service info 3.1
op. prioritisation
hot water charging
hot water top
calculated flow temp.
degree minutes
outdoor temp.
charge pump speed
status
AA25
hot water
49.0 °C
52.0 °C
5.8 °C
-700
-5.6 °C
57 %
ext heat. med. pump
runs
Information about the actual operat-
ing status of the installation (e.g. cur-
rent temperatures etc.) can be ob-
tained here. No changes can be made.
The information is on several pages.
Turn the control knob to scroll
between the pages.
Symbols in this menu:
HeatingCom-
pressor
Hot wa-
ter
Addi-
tion
PoolCooling
Ventila-
tion
Heating
medium
pump
(or-
ange)
Menu
3.1
compressor info
compressor info 3.2
status:
number of starts:
total operating time:
- of which hot water:
heating
195 hrs
5 hrs
slave 1
s2 s3 s4 s5 s6 s7 s8
Information about the compressor’s
operating status and statistics can be
obtained here. No changes can be
made.
The information is on several pages.
Turn the control knob to scroll
between the pages.
Menu
3.2
51NIBE™ SMO 40Chapter 3 | SMO 40 – at your service
service info
service info 3.1
op. prioritisation
hot water charging
hot water top
calculated flow temp.
degree minutes
outdoor temp.
charge pump speed
status
AA25
hot water
49.0 °C
52.0 °C
5.8 °C
-700
-5.6 °C
57 %
ext heat. med. pump
runs
Information about the actual operat-
ing status of the installation (e.g. cur-
rent temperatures etc.) can be ob-
tained here. No changes can be made.
The information is on several pages.
Turn the control knob to scroll
between the pages.
Symbols in this menu:
HeatingCom-
pressor
Hot wa-
ter
Addi-
tion
PoolCooling
Ventila-
tion
Heating
medium
pump
(or-
ange)
Menu
3.1
compressor info
compressor info 3.2
status:
number of starts:
total operating time:
- of which hot water:
heating
195 hrs
5 hrs
slave 1
s2 s3 s4 s5 s6 s7 s8
Information about the compressor’s
operating status and statistics can be
obtained here. No changes can be
made.
The information is on several pages.
Turn the control knob to scroll
between the pages.
Menu
3.2
51NIBE™ SMO 40Chapter 3 | SMO 40 – at your service
Menu 3.2 - compressor info
Information about the compressor’s operating status and
statistics can be obtained here. But no changes can be made.
If there is more than one climate system the information is on
several pages. Turn the control knob to scroll between the
pages.
service info 3.1
op. prioritisation
hot water charging
hot water top
calculated flow temp.
degree minutes
outdoor temp.
charge pump speed
status
AA25
hot water
49.0 °C
52.0 °C
5.8 °C
-700
-5.6 °C
57 %
ext heat. med. pump
runs
HeatingCompressor
Hot waterAddition
Cooling
Heating
medium
pump
(orange)
compressor info 3.2
status:
number of starts:
total operating time:
- of which hot water:
heating
195 hrs
5 hrs
slave 1
s2 s3 s4 s5 s6 s7 s8
service info
service info 3.1
op. prioritisation
hot water charging
hot water top
calculated flow temp.
degree minutes
outdoor temp.
charge pump speed
status
AA25
hot water
49.0 °C
52.0 °C
5.8 °C
-700
-5.6 °C
57 %
ext heat. med. pump
runs
Information about the actual operat-
ing status of the installation (e.g. cur-
rent temperatures etc.) can be ob-
tained here. No changes can be made.
The information is on several pages.
Turn the control knob to scroll
between the pages.
Symbols in this menu:
HeatingCom-
pressor
Hot wa-
ter
Addi-
tion
PoolCooling
Ventila-
tion
Heating
medium
pump
(or-
ange)
Menu
3.1
compressor info
compressor info 3.2
status:
number of starts:
total operating time:
- of which hot water:
heating
195 hrs
5 hrs
slave 1
s2 s3 s4 s5 s6 s7 s8
Information about the compressor’s
operating status and statistics can be
obtained here. No changes can be
made.
The information is on several pages.
Turn the control knob to scroll
between the pages.
Menu
3.2
51NIBE™ SMO 40Chapter 3 | SMO 40 – at your service
service info
service info 3.1
op. prioritisation
hot water charging
hot water top
calculated flow temp.
degree minutes
outdoor temp.
charge pump speed
status
AA25
hot water
49.0 °C
52.0 °C
5.8 °C
-700
-5.6 °C
57 %
ext heat. med. pump
runs
Information about the actual operat-
ing status of the installation (e.g. cur-
rent temperatures etc.) can be ob-
tained here. No changes can be made.
The information is on several pages.
Turn the control knob to scroll
between the pages.
Symbols in this menu:
HeatingCom-
pressor
Hot wa-
ter
Addi-
tion
PoolCooling
Ventila-
tion
Heating
medium
pump
(or-
ange)
Menu
3.1
compressor info
compressor info 3.2
status:
number of starts:
total operating time:
- of which hot water:
heating
195 hrs
5 hrs
slave 1
s2 s3 s4 s5 s6 s7 s8
Information about the compressor’s
operating status and statistics can be
obtained here. No changes can be
made.
The information is on several pages.
Turn the control knob to scroll
between the pages.
Menu
3.2
51NIBE™ SMO 40Chapter 3 | SMO 40 – at your service
service info
service info 3.1
op. prioritisation
hot water charging
hot water top
calculated flow temp.
degree minutes
outdoor temp.
charge pump speed
status
AA25
hot water
49.0 °C
52.0 °C
5.8 °C
-700
-5.6 °C
57 %
ext heat. med. pump
runs
Information about the actual operat-
ing status of the installation (e.g. cur-
rent temperatures etc.) can be ob-
tained here. No changes can be made.
The information is on several pages.
Turn the control knob to scroll
between the pages.
Symbols in this menu:
HeatingCom-
pressor
Hot wa-
ter
Addi-
tion
PoolCooling
Ventila-
tion
Heating
medium
pump
(or-
ange)
Menu
3.1
compressor info
compressor info 3.2
status:
number of starts:
total operating time:
- of which hot water:
heating
195 hrs
5 hrs
slave 1
s2 s3 s4 s5 s6 s7 s8
Information about the compressor’s
operating status and statistics can be
obtained here. No changes can be
made.
The information is on several pages.
Turn the control knob to scroll
between the pages.
Menu
3.2
51NIBE™ SMO 40Chapter 3 | SMO 40 – at your service
service info
service info 3.1
op. prioritisation
hot water charging
hot water top
calculated flow temp.
degree minutes
outdoor temp.
charge pump speed
status
AA25
hot water
49.0 °C
52.0 °C
5.8 °C
-700
-5.6 °C
57 %
ext heat. med. pump
runs
Information about the actual operat-
ing status of the installation (e.g. cur-
rent temperatures etc.) can be ob-
tained here. No changes can be made.
The information is on several pages.
Turn the control knob to scroll
between the pages.
Symbols in this menu:
HeatingCom-
pressor
Hot wa-
ter
Addi-
tion
PoolCooling
Ventila-
tion
Heating
medium
pump
(or-
ange)
Menu
3.1
compressor info
compressor info 3.2
status:
number of starts:
total operating time:
- of which hot water:
heating
195 hrs
5 hrs
slave 1
s2 s3 s4 s5 s6 s7 s8
Information about the compressor’s
operating status and statistics can be
obtained here. No changes can be
made.
The information is on several pages.
Turn the control knob to scroll
between the pages.
Menu
3.2
51NIBE™ SMO 40Chapter 3 | SMO 40 – at your service
service info
service info 3.1
op. prioritisation
hot water charging
hot water top
calculated flow temp.
degree minutes
outdoor temp.
charge pump speed
status
AA25
hot water
49.0 °C
52.0 °C
5.8 °C
-700
-5.6 °C
57 %
ext heat. med. pump
runs
Information about the actual operat-
ing status of the installation (e.g. cur-
rent temperatures etc.) can be ob-
tained here. No changes can be made.
The information is on several pages.
Turn the control knob to scroll
between the pages.
Symbols in this menu:
HeatingCom-
pressor
Hot wa-
ter
Addi-
tion
PoolCooling
Ventila-
tion
Heating
medium
pump
(or-
ange)
Menu
3.1
compressor info
compressor info 3.2
status:
number of starts:
total operating time:
- of which hot water:
heating
195 hrs
5 hrs
slave 1
s2 s3 s4 s5 s6 s7 s8
Information about the compressor’s
operating status and statistics can be
obtained here. No changes can be
made.
The information is on several pages.
Turn the control knob to scroll
between the pages.
Menu
3.2
51NIBE™ SMO 40Chapter 3 | SMO 40 – at your service
service info
service info 3.1
op. prioritisation
hot water charging
hot water top
calculated flow temp.
degree minutes
outdoor temp.
charge pump speed
status
AA25
hot water
49.0 °C
52.0 °C
5.8 °C
-700
-5.6 °C
57 %
ext heat. med. pump
runs
Information about the actual operat-
ing status of the installation (e.g. cur-
rent temperatures etc.) can be ob-
tained here. No changes can be made.
The information is on several pages.
Turn the control knob to scroll
between the pages.
Symbols in this menu:
HeatingCom-
pressor
Hot wa-
ter
Addi-
tion
PoolCooling
Ventila-
tion
Heating
medium
pump
(or-
ange)
Menu
3.1
compressor info
compressor info 3.2
status:
number of starts:
total operating time:
- of which hot water:
heating
195 hrs
5 hrs
slave 1
s2 s3 s4 s5 s6 s7 s8
Information about the compressor’s
operating status and statistics can be
obtained here. No changes can be
made.
The information is on several pages.
Turn the control knob to scroll
between the pages.
Menu
3.2
51NIBE™ SMO 40Chapter 3 | SMO 40 – at your service
Get information
Overview
Sub-menus
For the menu "INFO" there are several sub-menus. No settings
can be made in these menus, they just display information.
Status information for the relevant menu can be found on the
display to the following menus.
service info
INFO 3
compressor info
add. heat info
alarm log
off
runs
indoor temp. log
"
service info
" shows temperature levels and settings in the
installation.
"
compressor info
" shows operating times, number of starts
etc for the compressor in the heat pump.
"
add. heat info
" displays information about the additional
heat's operating times etc.
"
alarm log
" shows the latest alarms.
"
indoor temp. log
" the average temperature indoors week by
week during the past year.