Mitsubishi Heavy Industries SCM50ZS-S1 - Component Replacement

-
271
-
'18 • SCM-T-251
10. COMPONENT REPLACEMENT
Models SCM50ZS-S1, 60ZM-S1
Fan and fan motor (FMo)
1. Loosen 5 screws and remove
the top panel.
2. And then loosen 7 screws and
remove the front panel together
with the fan guard.
3. Loosen a nut and remove the fan
propeller.
4. Disconnect the connector of
CNFAN.
Screws (For front panel)
Screws (For front panel)
Screws (For top panel)
Nut
Screws (For front panel) Screw (For top panel)
Screws (For top panel)