To Next PageTo Next PageHow to restart Mitsubishi Heavy Industries Air Conditioner after power outage?
If, after a power cut, your Mitsubishi Heavy Industries Air Conditioner doesn't restart even after power is restored, use the remote control to start the operation again.
What to do if Mitsubishi Heavy Industries SRF35ZJX-S Air Conditioner is not cooling enough?
If your Mitsubishi Heavy Industries Air Conditioner isn't cooling adequately, check if direct sunlight is entering the room. Also, identify and eliminate any heat sources present, and consider if there are too many occupants in the room.
How to fix a Mitsubishi Heavy Industries SRF35ZJX-S Air Conditioner when remote control signals are not received?
If remote control signals are not received by your Mitsubishi Heavy Industries Air Conditioner, it may be because the signal receiver is exposed to direct sunlight or other bright light. If so, cut out the sunlight or reduce the other light.
How to improve poor cooling or heating in my Mitsubishi Heavy Industries Air Conditioner?
If your Mitsubishi Heavy Industries Air Conditioner isn't cooling or heating well, make sure the thermostat is set to a suitable temperature, the air filter is clean, and all doors and windows are closed.
How to fix a Mitsubishi Heavy Industries Air Conditioner that won't turn on?
General| Cooling Capacity | 3.5 kW |
|---|---|
| Heating Capacity | 4.0 kW |
| Indoor Unit Dimensions (W x H x D) | 845 x 275 x 228 mm |
| Outdoor Unit Dimensions (W x H x D) | 780 x 540 x 269 mm |
| Refrigerant | R32 |
| Energy Efficiency Ratio (EER) | 3.50 |
| Power Supply | 220-240V, 50Hz |
| Energy Efficiency Ratio (Cooling) | 3.50 |
