To Next PageTo Next PageWhy doesn't my Mitsubishi Heavy Industries Air Conditioner restart immediately?
The restart of your Mitsubishi Heavy Industries Air Conditioner is blocked for 3 minutes after you have stopped the operation to protect the unit.
Why is my Mitsubishi Heavy Industries SRK35ZMP-S not cooling or heating properly?
If your Mitsubishi Heavy Industries Air Conditioner isn't cooling or heating properly, make sure you've set the thermostat to a suitable temperature. Also, check if the air filter is clean and not clogged. Ensure that all doors and windows are closed, there's no direct sunlight entering the room, no heat sources present, and that the room isn't overcrowded.
How to troubleshoot a Mitsubishi Heavy Industries Air Conditioner that won't turn on?
If your Mitsubishi Heavy Industries Air Conditioner isn't working at all, check if the power switch is turned on. Also, verify if the timer has been set to the “ON” position. Finally, check for a power failure or a blown fuse.
What to do if remote control signals are not received by my Mitsubishi Heavy Industries SRK35ZMP-S?
If the remote control signals are not being received by your Mitsubishi Heavy Industries Air Conditioner, it may be because the signal receiver on the unit is exposed to direct sunlight or other bright light. Try cutting out the sunlight or reducing the other light.
Why does the RUN light stay on even though operation was stopped on my Mitsubishi Heavy Industries Air Conditioner?
The RUN light stays on during CLEAN operation for Mitsubishi Heavy Industries Air Conditioner. The light turns off when CLEAN operation ends.
Why does steam escape from my Mitsubishi Heavy Industries Air Conditioner during COOL operation?
Steam may escape during COOL operation if the room’s temperature and humidity are very high. It disappears as soon as the temperature and humidity decrease.
Why does my Mitsubishi Heavy Industries Air Conditioner have a slight smell?
If you notice a slight smell from your Mitsubishi Heavy Industries Air Conditioner, it may be caused by tobacco or cosmetics adhering to the unit. The air blown out during operation may carry this smell.
Why do I hear a gurgling sound from my Mitsubishi Heavy Industries Air Conditioner?
If you hear a slight gurgling sound from your Mitsubishi Heavy Industries Air Conditioner, it's caused by refrigerating liquid moving within the unit.
Why does my Mitsubishi Heavy Industries SRK35ZMP-S sometimes not blow warm air during heating?
If the outdoor temperature is low and humidity is high, your Mitsubishi Heavy Industries Air Conditioner may automatically perform defrosting. Please wait.
What to do if Mitsubishi Heavy Industries Air Conditioner doesn't restart after power cut?
If your Mitsubishi Heavy Industries Air Conditioner doesn't restart after a power cut, and the auto restart function is not set, use the remote control to start the operation again.
General| Cooling Capacity | 3.5 kW |
|---|---|
| Heating Capacity | 4.0 kW |
| Power Supply | 220-240 V, 50 Hz |
| Weight (Indoor Unit) | 10 kg |
| Refrigerant | R32 |
| Type | Split System |
| Outdoor Unit Dimensions (W x H x D) | 780 x 540 x 285 mm |
| Noise Level (Indoor Unit) | 21 dB |
| Noise Level (Outdoor Unit) | 50 dB |
